Mold found on hard surfaces can typically be removed with a damp cloth and a general household cleaning agent. If you suspect a sewage release may have contributed to the moisture that's allowing the mold to grow, a mixture of 1-part bleach and 8-parts water should be used to clean and disinfect the
Clean up mold in the house by wiping the mold-infected surface with a damp cloth and cleaning agent or by preparing a mixture of bleach and tap water and using it to spray down the desired areas. Use the latter only for large mold problems.
To remove black mold, prepare the area by sealing vents and doorways with plastic sheeting and duct tape, open windows to ventilate the area, and wash all contaminated surfaces with detergent and water. Always wear safety gear such as gloves and safety glasses to prevent health risks posed by black
To clean black mold, wash the surface of the material with soap and water, and then disinfect the area with bleach or a commercial mold killer. Some porous materials must be replaced if the mold cannot be removed.
Mold on hard surfaces is best cleaned using soap and water, commercial cleaners, or a solution of 1 cup bleach per gallon of water, states the Centers for Disease Control and Prevention. If mold is growing on absorbent surfaces, such as carpeting or drywall, it's best to discard the material.
There are several ways to clean mold off walls, including the use of bleach and hydrogen peroxide, by simply wiping the walls with them. There are non-toxic ways to kill mold if bleach is not preferred.
Get rid of mold in the shower by spraying with a bleach solution, scrubbing the surfaces and scraping deeply stained grout. Prevent future growth by keeping the shower dry and providing adequate ventilation.
One good way to clean mold off fabric is to use bleach. A solution of bleach and water kills mold and fades away the mold stains on clothes. Using hot water kills mold better that cold water, and it removes mold spores and allergens.
To clean mold from a refrigerator, clean out the refrigerator, and mix baking soda and mild detergent with lukewarm water. Clean the inside of the refrigerator using a washcloth dipped into the baking soda mixture.
Use a soft brush to vacuum loose spores on the furniture, then dip a cloth in diluted dishwashing detergent and wipe the affected area. Another way to remove mold is to spray vinegar on the affected area, let it sit for an hour, then wipe clean and allow to dry.