Web Results


Circulate warm coolant in stationary engine applications during cold weather. Coolant circulation heaters ensure dependable engine starts all year long. By circulating warmed coolant through the engine, it insures fast starts for critical applications, quick acceptance of loads, reduces fuel consumption, emissions and engine wear.


Constant circulation of heated engine coolant eliminates hotspots that can deteriorate heater hoses, harm engine seals and diminish coolant life. HOTflow® Forced Circulation engine heaters rely on fewer heating cycles while maintaining the temperature of the engine keeping it ready for full load power in an emergency.


Coolant Circulating Heating System TCR Controlled 216261-000 REV 5 ... Must be mounted at or below engine coolant level. Mount heater in a location that minimizes the length of the ... the heating system without draining the engine coolant. Pressure and steam hazard: power must be turned off and locked out at the ...


Engine Cooling System Heater Kit External Circulating Coolant Heater. Please contact us with questions about compatibility 1500 Watt, 120 Volt Designed for 26 - 40 quart cooling systems Includes power cord, clamps, hose Y fitting, mounting bracket, and engine fitting Keeps engine warm in cold temperatures


Circulation heaters offer dependable engine starts all winter long by circulating warmed coolant through the engine. It assures fast defrost and heater action while gently decreasing engine emissions associated with cold starts.


With all the valving the coolant will not be allowed to run through the engine. If the car is older than 1996 it can be used but needs to be installed at the lowest point of coolant in the engine compartment. Please note that a tank heater is 50% as effective in preheating an engine in cold weather as compared to a block heater.


Kat’s heaters offer a wide variety of effective, economical solutions to cold weather maintenance. Three Areas to Winterize for Complete Vehicle Protection. Engine; Battery; Oil & Transmission Fluid; Heating the Engine. The frost plug, lower radiator hose heater, or circulating tank heater are designed to keep the coolant in your engine warm.


Proper mounting and installation of Hotstart engine heaters will ensure reliable and efficient operation of the heater. This instructional video provides step by step instructions to assist you in ...


Installation Instructions Tank Type Engine Heater 80-669 03/01 Operating Principle The engine heater operates on the principle of a thermosiphon as shown in figure 1. As the temperature of the coolant in the heater tank increases, its density decreases causing it to rise through the outlet of the tank to the engine. The coolant leaving the ...


Shop Acklands-Grainger for quality Circulation Heaters products. Acklands has been Canada's premiere industrial supplier for over 125 years. ... Industrial tank/circulation engine heater, 1500 watts, male plug, 120 volts, 12.5 amps, inlet and outlet 5/8 inch.