To replace a car’s ignition switch, one must remove the steering column, disconnect the wiring, test the switch, and install the new switch, according to DoItYourself. This task requires a replacement ignition switch, a test light, a screwdriver, a ratchet, wires and wr...
Replacement ignition switches are available at most auto part stores, including JC Whitney, O'Reilly Auto Parts and NAPA. Each of these stores also make the ignition switches available for purchase online, according to their websites.
An ignition switch is replaced by disconnecting the car battery, removing the steering wheel, taking off the turn signal and wiper, removing the ignition switch and key cylinder and installing the new ignition. The tools needed to replace an ignition switch include smal...
The ignition switch sends voltage through all of the components that start the engine. An ignition switch is found inside the steering column of a vehicle and is connected to the lock cylinder. When the key is turned to the on position, voltage flows from the battery to...
The steering column of a vehicle and the dashboard are the two common locations for a car's ignition switch, according to Your Mechanic. This location makes it easy for the driver to start a vehicle and enables the transfer of power to the starter after a turn of the ke...
An ignition switch works by turning the car's ignition system on and off. It is operated by an ignition key that flips it on and off. This switch is located on the car's steering column or dashboard.
It is easier to replace an ignition switch than manually attempting to repair the device. The ignition switch may have failed if a vehicle does not start or if the dashboard lights don't turn on when the key is turned to the on position.