Web Results

itstillruns.com/366-gas-big-block-specifications-8050874.html

The 366 big block is one of Chevrolet's big block engines. The big block Chevrolet (BBC) was mainly used on school buses and medium-duty pickup trucks. Chevrolet ended production of the 366 BBC in the 1990s. The GMC Silverado 2500 and Sierra 3500 are two examples of pickup trucks that used the 366 BBC.

itstillruns.com/366-chevy-specs-7601936.html

The Chevrolet 366 engine has been a long-lasting design in Chevy's lineup of trucks. According to the Truck Trend website, this big-block engine comes standard in the Chevy Silverado 2500 and 3500 models. It has more torque and horsepower than 10-cylinder engines made by both Ford and Dodge and is rated highly by ...

en.wikipedia.org/wiki/Chevrolet_Big-Block_engine

The Vortec 7400 L21 was a commercial version of the Chevrolet Big-Block engine used in the medium duty truck platform. Its design shared much with the L29 454, but with the addition of forged pistons and crankshaft, and coil near plug ignition. It had slightly reduced power compared to the L29 454 and used a different PCM.

forums.superchevy.com/super-chevy/70/9464569/tech-talk/big-block-366

I don't know anything about 366's except its a dump truck engine.A quick run through google produced this: A 366 big block Chevy usually had between 220 - 262 hp and the torque usually ran between 450-510 they were a very low end torque engine they were built for nothing else but pulling they were put into medium duty truck usually from 2 ton to 3 ton trucks.

www.answers.com/Q/Horsepower_on_a_366_big_block

A 366 big block Chevy usually had between 220 - 262 hp and the torque usually ran between 450-510 they were a very low end torque engine they were built for nothing else but pulling they were put ...

www.reference.com/vehicles/specifications-366-chevy-engine...

What Are the Specifications for a 366 Chevy Engine? The 366 Chevy engine is an eight-cylinder, six-liter engine with a bore of 3.935 inches and a stroke of 3.76 inches. It has 300 horsepower at 4,400 revolutions per minute.

www.youtube.com/watch?v=p2RCfr5eik8

The 366 Big block V-8 (6.0 L) gasoline engine was used only in Chevrolet Medium duty trucks and in school buses. It had a bore of 3.935" and a stroke of 3.760". This engine was made from the 1960s ...

www.ebay.com/bhp/366-chevy-engine

Find great deals on eBay for 366 Chevy Engine in Complete Engines. Shop with confidence. Find great deals on eBay for 366 Chevy Engine in Complete Engines. ... CHEVY GMC 6.0 366 C.I. BLOCK ENGINE KIT 1986-90. TIMING SET ( except gear drive ). FREEZE PLUG KIT. NEW CAMSHAFT.-ENGINE REBUILD KIT- 1991-1998 Fits Chevy GM 366 6.0L V8.

www.superchevy.com/.../project-cars/sucp-0102-chevrolet-396-big-block

The Chevrolet 396-cid, big-block's destiny was decided long ago. After punching the block out 0.030-inch and increasing its displacement to 402-cid back in 1970, a couple years later, GM stopped ...

www.roadsters.com/bbc

These were one of very few aftermarket valve covers to have oil drippers located above the rocker arms. Although Cal Custom made valve covers for many different engines, the big block Chevy version was the only one that I know of, and the only aftermarket big block Chevy valve covers that I know of other than Edelbrock, that had drippers.