Web Results


The Occupational Safety and Health Administration (OSHA) began requiring chemical manufacturers to label dangerous materials with hazard pictograms in June of 2015. The standard helps decrease the risk of injuries, illnesses and accidents caused by exposure to certain chemicals.


These chemicals cause health problems. Usually less toxic than chemicals labeled with with the Health Hazard or Skull and Cross-bone pictograms. This pictogram is also used for chemicals that can destroy the ozone layer. Environment Aquatic Toxicity These chemicals are dangerous if they get into rivers, lakes or oceans.


GHS pictograms are symbols with red diamond borders that are designed to provide hazard information to handlers of chemicals universally at a glance. There are 9 different pictograms that identify risks in three different categories including: chemical/physical, health or environmental.


The labels must communicate what hazards are posed by the chemical, as well as its uses and other relevant information. This primer guide will provide an overview of the new standard, visual examples, and an in-depth discussion of chemical labels. PICTOGRAMS. HazCom labels are required to have pictograms.


For Globally Harmonized System (GHS) chemical hazard signs and labels, you're at the right place. These US-made signs and labels feature GHS pictogram symbols to help you comply with the OSHA Hazard Communication Standard for chemical labeling. All are available in a variety of sizes. Use diamond-shaped GHS labels on chemical containers


OSHA Clarifies the Use of GHS Pictograms on Labels. Written By: Atanu Das on Sunday, March 11, 2018. In a recent Letter of Interpretation, OSHA answers a chemical manufacturer's inquiry on the proper use of the GHS pictograms for various circumstances. Here is the summary of the Q and A:


A single label may contain one or multiple pictograms depending on the hazards presented by the chemical. Concise and easy to read information is the epitome of visual communication, and pictograms do just that.


Many countries have set GHS label requirements on sizes for chemical packages with different packaging capacities. Some countries have even set additional requirements on GHS label pictogram size and even font size. Under TDG regulations, there are also requirements on the minimum dimension of hazard labels. (i.e, 100mm x100mm for >25kg packages).


Minimum dimensions of labels and pictograms; Capacity of the package Dimensions of label (mm) for Article 17 information Dimension of each pictogram (mm) ≤ 3 litres: If possible at least 52 x 74: Not smaller than 10 x 10. If possible 16 x 16 > 3 litres but ≤ 50 litres: At least 74 x 105: At least 23 x 23 > 50 litres but ≤ 500 litres: At ...


The GHS-inspired standards will require chemical manufacturers and importers to label chemical containers with 1) a harmonized signal word 2) GHS pictogram(s) 3) a hazard statement for each hazard class and category and 4) a precautionary statement. These elements are discussed in greater detail below: