To change a rear wiper blade, detach its cap, the arm of the wiper and the cover of the arm; remove the wiper and the wiper panel; and disconnect the motor of the wiper. Then, loosen the existing blade of the wiper, and ... More »

www.reference.com Vehicles Car Parts & Maintenance

In order to replace the rear wiper blade on your vehicle, refer to the manufacturer's user manual for instructions. The exact process is dependent on the individual make and model of the vehicle, as there are a few diffe... More »

To replace a windshield wiper transmission, first remove the windshield wiper arm, remove the air inlet cowl panel, disconnect the wiring connector from the wiper motor, and then remove the whole wiper transmission assem... More »

www.reference.com Vehicles Car Parts & Maintenance

To install wiper blades, remove the old blades, line up one of the new blades with the first arm, and hook the new blade into the clip. Repeat this process on the other side. More »

www.reference.com Vehicles Car Parts & Maintenance

To install a new windshield wiper blade, lift up the old blade, press the tab on the underside, and slide the old blade off the wiper arm. Finally, line up the new windshield wiper blade with the hook, and pull it tight ... More »

www.reference.com Vehicles Car Parts & Maintenance

To install a Ford Taurus wiper arm, pull the existing wiper arm away from windshield until it locks, unscrew the nut at the base of the wiper arm, and then pull the existing arm off of the pivot arm and motor assembly. I... More »

To change car wiper blades, pull the wipers away from the windshield, press the attachment tab, remove the wiper blades from the wiper arm, install the new blades in the wiper arms, and push the wipers back to the windsc... More »