To install ceramic tile on stairs, first ensure that the risers and treads are level and then apply a mortar bed. Next, apply the tiles using the thin-set method and grout to finish the job. Ceramic tile can cover stairs... More »

To lay out stairs, start by calculating rise and run, cutting stringers and installing treads and risers. This may seem simple to some, but the steps must adhere to strict building codes for safety reasons. Those lacking... More »

www.reference.com Home & Garden Home Maintenance Carpentry

To build a set of stairs, calculate its rise and run, cut stringers according to the calculations and install them, then attach the treads and risers to the stringers. Building stairs is fairly straightforward, with just... More »

www.reference.com Home & Garden Home Maintenance Carpentry

To install stair treads and risers, measure the stairs, buy or make appropriate risers and treads, apply adhesive across the base material, and tack the pieces on with thin nails. The stairs may be used in approximately ... More »

www.reference.com Home & Garden Home Maintenance

To install a ceramic tile floor, spread thin-set mortar over the installed backer board, and press tiles firmly into the mortar in a predetermined pattern, using spacers to ensure even installation. After the mortar hard... More »

www.reference.com Home & Garden Home Maintenance Carpentry

To install Eliane porcelain tile, mix the thinset mortar. Apply it to the subfloor with a trowel and press a tile into it, pushing down until the tile is 1/4 inch into the mortar. Place a spacer at each end of the tile, ... More »

www.reference.com Home & Garden Home Maintenance Carpentry

To tile stairs, select a suitable set of traction tiles and place them using cement and making sure they are level. Gather tile-laying material, and employ suitable techniques to ensure all tiles are affixed evenly. More »

www.reference.com Home & Garden Home Maintenance Carpentry