Web Results


ble with water at any ratio. Caustic Soda Solu-tion reacts strongly alkaline and is highly corro-sive to various materials. Test method Raw Material Properties Typical Value * Unit DIN Sodium Hydroxide (NaOH) 50 % Molecular Mass 40 g/Mol Density at 20°C 1,5 g/cm 3 51757 Dynamic Viscosity at 20°C Approximately 79 mPas 51562


Sodium hydroxide solution 50% in H2O; CAS Number: 1310-73-2; Linear Formula: HNaO; find Sigma-Aldrich-415413 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.


CAUSTIC SODA SOLUTION (50%) Revision 3.0 Revision Date 02.01.2018 Print Date 02.01.2018 Page 5 of 22 sodium hydroxide (caustic soda) Value type Route of exposure Health Effects Value Remarks Worker (short-term) DNEL Dermal - local effects < 2 % DNEL Inhalation - local effects no data available Worker (long-term)


Liquid Caustic Soda, (Sodium Hydroxide), 50% – HAWKINS is a key CAUSTIC SODA distributor and operates liquid CAUSTIC SODA barge terminals in Memphis, TN, Dupo, IL, Camanche, IA, and St. Paul, MN. The product can be supplied as is, diluted with water to a specified concentration, or buffered to significantly reduce the freezing point.


Shop a large selection of Sodium Hydroxide (NaOH) products and learn more about Sodium hydroxide, extra pure, 50 wt% solution in water, ACROS Organics. 25mL; Plastic bottle.


Take 1000 ml water in a conical flask. As the molecular weight of NaOH is 40 so to make 50% solution take 20 gm of that NaOH into the water. agitate that solution and then you will get 50% NaOH solution .


Sodium hydroxide, also known as lye and caustic soda, is an inorganic compound with the formula NaOH. It is a white solid ionic compound consisting of sodium cations Na + and hydroxide anions OH −. Sodium hydroxide is a highly caustic base and alkali that decomposes proteins at ordinary ambient temperatures and may cause severe chemical burns.It is highly soluble in water, and readily ...


Product name : Sodium Hydroxide, 50% w/w CAS-No. : 1310-73-2 Product code : LC24150 Formula : NaOH Synonyms : caustic soda 50% W/W / soda lye, 50%, aqueous solution / white caustic, 50%, aqueous solution . 1.2. Recommended use and restrictions on use . Use of the substance/mixture : Industrial use Recommended use : Laboratory chemicals


is often known as caustic soda or simply “caustic.” The most common concentration of NaOH is 50%, although it can range from trace to about 70%. At ambient temperature and up to 70% concentration, 316 SS has an “A” rating and can be used for the pump housings, shafts and drive gear.


The table below gives the density (kg/L) and the corresponding concentration (% weight) of Sodium Hydroxide in water at different temperatures in degrees centigrade (°C). The table was taken from "Perry's Chemical Engineers' Handbook" by Robert H. Perry, Don Green, Sixth Edition.