Web Results

en.wikipedia.org/wiki/Camshaft

While today some engines rely on a single camshaft per cylinder bank, which is known as a single overhead camshaft (SOHC), most [quantify] modern engines are driven by a two camshafts per cylinder bank arrangement (one camshaft for the intake valves and another for the exhaust valves); such camshaft arrangement is known as a double or dual overhead cam (DOHC), thus, a V engine, which has two ...

auto.howstuffworks.com/camshaft1.htm

Pushrod Engines. Like SOHC and DOHC engines, the valves in a pushrod engine are located in the head, above the cylinder. The key difference is that the camshaft on a pushrod engine is inside the engine block, rather than in the head.. The cam actuates long rods that go up through the block and into the head to move the rockers.

www.reference.com/vehicles/cam-position-sensor-located...

Where Is the Cam Position Sensor Located in a Vehicle? ... to gather information about the rotation of the camshaft and send that information to the computer that controls the engine. Symptoms of a problem in the cam position sensor include difficulty starting the car, the engine misfiring or dying, and the check engine light illuminating. ...

www.autozone.com/repairguides/Audi-Cars-1999-05/Component...

The Camshaft Position (CMP) Sensor is located in the right side of the engine compartment at the rear of the valve cover, near the intake manifold. Fig. Camshaft Position sensor location for the 3.0L engine

mechanicbase.com/engine/camshaft-position-sensor-symptoms

Where is the Camshaft Position Sensor located? The camshaft sensor is mostly mounted to the engine block or the cylinder head of the engine in most vehicles. The location of the camshaft sensor can be different depending on the engine model and manufacturer. Use the service manual guide of your vehicle to locate it in case you are not able to ...

www.answers.com/Q/Where_is_Camshaft_Position_Sensor_located

The camshaft position sensor, on a Ford 6.0 liter power strokeengine, is located inside of the rear engine cover. The sensor ison the back of the camshaft. share with friends

en.wikipedia.org/wiki/Overhead_camshaft

Overhead camshaft, commonly abbreviated to OHC, is a valvetrain configuration which places the camshaft of an internal combustion engine of the reciprocating type within the cylinder heads ("above" the pistons and combustion chambers) and drives the valves or lifters in a more direct manner compared with overhead valves (OHV) and pushrods.

axleaddict.com/auto-repair/Bad-Camshaft-Position-Sensor...

The crankshaft, located in the engine block, drives the camshaft using gears, a timing chain, or a timing belt. Camshaft | Source To determine which cylinder is in its power stroke, your car's computer monitors the rotating position of the camshaft relative to the crankshaft position using a camshaft position (CMP) sensor.

auto.howstuffworks.com/camshaft.htm

Any given camshaft will be perfect only at one engine speed. At every other engine speed, the engine won't perform to its full potential. A fixed camshaft is, therefore, always a compromise. This is why carmakers have developed schemes to vary the cam profile as the engine speed changes. There are several different arrangements of camshafts on ...

www.yourmechanic.com/article/symptoms-of-a-bad-or-failing...

The camshaft position sensor gathers information about the vehicle’s camshaft speed and sends it to the vehicle’s engine control module (ECM).The ECM uses this data to determine the timing of the ignition, as well as the timing of the fuel injection that the engine requires. Without this information, the engine would not be able to function properly.