https://sciencing.com/convert-psi-gpm-water-8174602.html

Mar 13, 2018 ... If the pressure is known in pounds per square inch, or psi, at two locations along the pipe, then the Bernoulli equation can be used to determine ...

https://sciencing.com/how-7959217-calculate-rate-pipe-size-pressure.html

Aug 7, 2017 ... A higher pressure drop acting on a pipe creates a higher flow rate. A wider pipe also produces a higher volumetric flow, and a shorter pipe lets ...

http://www.calctool.org/CALC/eng/civil/hazen-williams_p

Civil Engineering online calculation: Flow in pressurized pipe - Pressure drop by Hazen-Williams equation.

https://www.hunker.com/13417095/how-to-calculate-gpm-from-psi

Jul 17, 2017 ... Pressure information such as pressure drops through sections of piping is usually related to flow capacity in gallons per minute (GPM).

http://www.pressure-drop.com/Online-Calculator/

Calculation of pressure drops of flowing liquids and gases in pipes and pipe ... Note: Calculations are possible only, if Javascript is activated in your browser.

https://www.hosemonster.com/calculating-flow-rates/

If you are using a software program to calculate flow, you may need to input a ... Computes a flow-rate in GPM given a psi and a K-factor of the flow device.

https://www.lmnoeng.com/DarcyWeisbach.php

Pipe flow calculator for pressure, flow, diameter, elevation, pump, minor losses, pipe ... m=meter, min=minute, N=Newton, Pa=Pascal, psi=lb/inch2, s=second.

http://www.1728.org/flowrate.htm

Flow rate calculator, pipe diameter, volume, time, liters, gallons, cubic feet, cubic inches, seconds, minutes, hours.

https://www.hy-techroofdrains.com/water-flow-through-a-pipe/

How much water can flow through a pipe (GPM/GPH)? ... Water Flow (GPM/GPH) based on Pipe Size and Inside/Outside Diameters ... PSI loss & noise), GPH

https://www.engineersedge.com/calculators/pipe_bust_calc.htm

Equation: Where: P = Fluid Pressure (psi) T = Pipe Wall Thickness (in) O.D. = Pipe Outside Diameter (in) SF = Safety factor (General Calculations 1.5 10, Use 1  ...