A listing of bolt torque specifications is available at EngineersHandBook.com. This website contains bolt torque specifications for materials such as steel, aluminum, brass and bronze in both standard and metric measurements.
EngineersHandbook.com and PortlandBolt.com are two sites that show bolt torque specification charts online. These charts indicate the estimated amount of torque to apply to the types of bolts indicated.
Find online torque specification charts for bolts on sites such as PortlandBolt.com, EngineersHandbook.com, BoltDepot.com, RepairEngineering.com and EngineersEdge.com. The charts on these sites contain information about torque requirements based on bolt size, the coarseness of bold threads and the t
Two useful websites for finding Flywheel bolt torque specs are Box Wrench and Maine Mustang. Box Wrench has specifications for a variety of makes and models, while Maine Mustang specializes in Ford engines.
The torque specifications for Chevrolet 350 cubic inch V8 head bolts are 65 foot-pounds per bolt if securing the stock cast iron head. Aftermarket aluminium heads have unique torque settings, so manufacturers' guides should be consulted.
The common torque ratings for bolts used depend on many different factors such as the bolt size, bolt material, number and type of threads and the condition of the bolt. The torque rating for various bolts also depends on the use and the purpose of the bolt.
Users can find torque specs for certain wheels at the Dorman Products wheel nut torque specifications document or at the Discount Tire wheel torque chart webpage. The two mentioned documents are not exhaustive, however. Torque specs for wheels of newer car models may not be available.
To find out a wheel torque spec, check the vehicle's manual, industry reference guide or the shop repair manual. Vehicle dealers can also provide an appropriate wheel torque spec.
The torque settings for cylinder head bolts are the manufacturer's recommendation for how tightly the bolts holding the cylinder heads to the engine block should be fastened. This is done using a special tool called a torque wrench that measures the pressure as the bolts are tightened.
Bolt torque calculators calculate the proper amount of torque for a particular bolt by collecting the dimensions and characteristics of the bolt in question. The calculator will generally return figures in the form of inch pounds or foot pounds.