Web Results

resources.infosecinstitute.com/rts-threshold-configuration...

The threshold range is around 0 – 2347 bytes; if the packet transmitted by the access point is larger than the threshold, the RTS/CTS function will initiate. If the packet size is less than the threshold or below average, the function will not initiate. RTS & Fragmentation threshold for improved performance

www.avg.com/en/signal/boost-home-wi-fi-signal-strength

Fragmentation Threshold: This value is used to set the maximum size of a packet that can be sent. Smaller packets improve reliability, but they will decrease performance. Unless you’re facing problems with an unreliable network, reducing the fragmentation threshold is not recommended. Make sure it is set to the default settings (usually 2346).

serverfault.com/questions/369850/rts-threshold...

Setting the RTS and fragmentation thresholds to the maximum means that no packets will meet the threshold. The fragmentation threshold limits the maximum frame size. This reduces the time required to transmit the frame, and therefore reduces the probability that it will be corrupted (at the cost of more data overhead).

community.ubnt.com/t5/NanoStation-and-Loco-Devices/Best...

What are the best settings for RTS Threshold: Fragmentation Threshold:??? Ive been using 256 768 but that seems to slow people down way too much What settings are you guys using?

www.home-network-help.com/wireless-network-performance.html

Fragmentation Threshold. Default setting is 2346 bytes and the allowed range is 256-2346 bytes. It specifies the maximum size for a packet before data is fragmented into multiple packets. Same as how RTS threshold works, if you notice frequent collisions on wireless network, then can consider to lower the threshold value.

now.avg.com/boost-signal-strength-improve-wi-fi-network-part-2

Fragmentation Threshold: This value is used to set the maximum size of packet a client can send. Smaller packets improve reliability, but they will decrease performance. Unless you’re facing problems with an unreliable network, reducing the fragmentation threshold is not recommended. Make sure it is set to the default settings (usually 2346).

community.linksys.com/t5/Wireless-Routers/Advanced...

This leaves nothing to do apart from tweaking the advanced wireless settings to marginally improve problems related to weak signal and/or RF interference, so I've been reading everything I can find on these boards and elsewhere about changing Fragmentation Threshold, RTS threshold, and beacon interval.

www.ispreview.co.uk/index.php/2015/04/10-top-tips-boosting...

11 Top Tips for Boosting Your Home Wi-Fi Wireless Network Speeds. Tuesday, April 7th, 2015 (2:31 am) - Score 167,467 . ... Fragmentation Threshold, RTS Threshold or various other things. ... and this approach should thus deliver the best of both worlds. ...

sites.google.com/site/embeddedsystesting/wireless...

What is Fragmentation threshold in Wireless (WLAN)/ How Fragmentation threshold is used in Wireless Fragmentation Threshold is one more parameter which is given in all stations and Access points. Fine tuning Fragmentation Threshold parameter can result in good throughput but not using it properly can results in low throughput.

journals.plos.org/plosone/article?id=10.1371/journal.pone.0013666

Ecological systems are vulnerable to irreversible change when key system properties are pushed over thresholds, resulting in the loss of resilience and the precipitation of a regime shift. Perhaps the most important of such properties in human-modified landscapes is the total amount of remnant native vegetation. In a seminal study Andrén proposed the existence of a fragmentation threshold in ...