An under-cabinet can opener is a small electric appliance that can be mounted beneath an upper kitchen cabinet, and is used to open canned foods. The advantages of an under-cabinet can opener are twofold: they do not take up counter space and, being electric, they easily open canned foods.
Some tips for building cabinets include getting the plywood cut at the hardware, cutting all pieces for one cabinet at a time and installing all boxes before pulling the doors open. Assemble all braces and shelves for one side of the cabinet before making the face frames. It is advisable to paint al
Paint cabinets by removing all the hardware and doors, preparing the surface, applying primer, and painting the cabinets. The length of the process varies on the size of the project and needs to allow for drying time. You need a screwdriver, a degreasing cleaner, sandpaper, painter's tape, primer, a
Cabinet fittings are the interior and exterior parts that attach cabinets to hardware and allow for opening and closing of cabinets and drawers. Exterior cabinet fittings can be plain silver, brass, gold or stainless steel or they may be decorative.
Companies that make parts cabinets include Akro-Mils, Vidmar and Kennedy. The cabinets made by these companies come in a number of styles and sizes.
The role of the president’s cabinet is split into two broad categories: advising the president on issues to do with policy, and carrying out any agreed upon plans. U.S. Cabinet members are given the title of Secretary.
Two of the 16 Cabinet-level positions are the Department of the Interior and Housing and Urban Development. The heads of each cabinet are appointed by the president and confirmed by a majority Senate vote. The Cabinet includes the vice president and the heads of 15 executive departments.
To install upper and base kitchen cabinets, mark their position on the wall, and locate the studs. For upper cabinets, attach a support board to the studs. Screw a few cabinets together, pre-drill on the studs and framing piece for screws, and attach cabinets.
To hang cabinets, mark reference lines, find the high-point, locate the studs, install the cleats, and hang the cabinets using shims and studs. The project takes 30 minutes for each cabinet installed.
To stain cabinets, prepare the wood by sanding off the old finish, then apply a wood conditioner to seal the wood. Apply the stain, going over the wood in a circular motion, and wipe off the excess. Apply two coats of a polyurethane varnish finish to seal in the stain.