Web Results


Golden Eagle LS-VTEC CONVERSION KIT: - Golden Eagles offers a Full Vtec Conversion kit for people that want to use an LS/VTEC or B20/VTEC set-up. - The Golden Eagle kit is one of the easiest and most complete way to supply oil to the head without any machining required


LSV CONVERSION LS B20 VTEC DOWEL PINS HEAD SWAP GSR DOWL for HONDA INTEGRA CIVIC See more like this. ARP 208-4306 Cylinder Head Stud Kit Integra Civic Swap LS VTEC CRV B20B B16 Head. ... COMETIC HEAD GASKET Honda Hybrid LS/VTEC .030 LS B20 VTEC Head C4193-030. Brand New · Cometic. $95.04. Was: Previous Price $108.00. or Best Offer. Free Shipping.


An LS/VTEC motor combines the bottom end of a non-VTEC b-series motor with a DOHC VTEC head. When using the bottom end from a b20 CRV motor, you get both the torque of a larger motor with the high-end power of a b18c. These motors are often called hybrid or Frankenstein motors. They get this name ...


Find great deals on eBay for B20 vtec Head in Cylinder Heads & Parts. Shop with confidence.


for the second time now. the b20a5 will NOT WORK in an b20/vtec configuration. it doesn't even LOOK like a b-series. it is a cast-a-way, and will not line up remotely with a gsr or b16 or it or ctr dohc b-series vtec head.


Re-worked head gasket (84mm+ for B20, 81mm + for ls/vtec) Now this kit means there is absolutely no Machining required, other than tapping the head for the Oil way plug. You can of course buy all the parts completly seperate and DIY, both ways work fine and neither are right or wrong,


The two main challenges you have to deal with when mating a VTEC head to a non-VTEC block are the oiling and the dowel pin locations. The LS and B20 blocks have their dowel pins on the outer head bolt holes on the intake side of the block while the VTEC engines have the holes on the exhaust side.


i have a 98 or 99 honda crv with a bad head on it. i also have a 90-93 b18a integra head. can i put the b18a1 head on the crv b20 block. i have asked around locally and everyone but one person said it will work. all i have to do is use all the crv parts. valve cover, intake manifold, distributor, ect. but i also have a problem with cams and cam gears i dont have them for the b18 head. can i ...


While the B20 was not popular at first, once LS/VTEC swaps became popular, many enthusiasts pushed the envelope, using the B20 as the bottom end for their “Frankenstein” swaps. By combining the bottom end of the 2.0L and the head of a VTEC B-Series version, many enthusiasts were able to extract plenty of torque and high-end horsepower for ...


wat head gasket to use on a b20vtec set up 20 Dec 2008, 01:22:37 ok so im building a b20vtec and i bought a stock b20 gasket but dont know if i can use it should i go with a golden eagle oh and im using 84.5mm pistons also can i use the stock b16 head dowel pins any info will be great thanks