Web Results

www.access-board.gov/guidelines-and-standards/buildings...

This guide explains requirements in the ADA Standards for clear floor or ground space and turning space. Clearances are required at accessible elements, fixtures, and controls so that people with disabilities, including those who use wheelchairs, can approach and use them.

www.ada.gov/descript/reg3a/fig31des.htm

The ADA Home Page provides access to Americans with Disabilities Act (ADA) ... Figure 31. Lavatory Clearances. The minimum knee clearance must be free of equipment or obstructions for a minimum of 8 inches (205 mm) extending from the front edge of the lavatory back toward the wall. This knee clearance must be 29 inches (735 mm) high at the ...

www.buildings.com/article-details/articleid/9242

Sinks & Faucets This single-user restroom has been designed according to the ADAAG. To meet ADA guidelines, sinks shouldn’t be mounted higher than 34 inches from the floor, and they should have a knee clearance of 27 inches high, 30 inches wide, and 11 to 25 inches deep. You also need a clear floor space and insulated pipes under the sink.

www.hunker.com/13402795/ada-kitchen-sink-requirements

In 1990 the federal government approved the Americans with Disabilities Act (ADA). While many may think that a kitchen sink does not need to be ADA compliant, it does when it is part of a public facility such as a restaurant or school.

www.ipscorp.com/pdf/truebro/TRBR010_Truebro_Brochure_web...

mechanical connections, and still maintains ADA mandated knee and foot clearance. Basin Guard can be installed under kitchen, classroom, and lavatory sinks where counter tops and sidewalls are present. Bottom opening allows for easy service access. ADA-CONFORMING DESIGN AND PROTECTION The Basin Guard's ADA-conforming design protects wheelchair

www.hunker.com/13417375/ada-requirements-for-a-pedestal-sink

The ability to access a sink is of utmost importance for pedestal sinks. The bowl of the pedestal sink should be at least 27 inches from the ground level and not more than 34 inches high. This ensures that handicapable persons can reach the water and sink bowl and that there is enough clearance for their knees under the bowl.

www.ada.gov/reg3a/fig31.htm

The ADA Home Page provides access to Americans with Disabilities Act (ADA) regulations for businesses and State and local governments, technical assistance materials, ADA Standards for Accessible Design, ... Fig. 31 Lavatory Clearances.

www.reference.com/home-garden/ada-kitchen-sink...

What Are the ADA Kitchen Sink Requirements? According to ADA accessibility guidelines, ADA-compliant kitchen sinks must sit no higher than 34 inches above the floor and have shallow bowls between 5 and 6-1/2 inches deep.

thelawdictionary.org/.../ada-bathroom-sink-height-requirements

The ADA Bathroom Sink Height Requirements include a depth maximum of 6.5 inches. The knee clearance should also have a width of 30 inches and depth of 19 inches. The disabled man should be able to position his wheelchair in front of the sink. ADA even suggests that the faucet handles should be push, lever, touch or motion sensor.

www.bradleycorp.com/download/2066/3931_ADA_Design_Guide.pdf

for meeting ADA needs and standard height washing comfort. All Bradley Lavatory fixtures are designed so that ADA toe and knee clearance starts at the wall. Towel Dispenser/Waste Receptacles Combination towel dispenser / waste receptacles provide practical use of space. To avoid a hazardous restroom, install towel dispensers next to the sink.