Web Results

findanyanswer.com/what-size-wire-do-i-need-to-run-a-100-amp-sub-panel

Mar 26, 2021 ... You need a 3-3-3-5 copper SER cable to carry 100 amps (that's three #3 gauge for the two hot wires and the neutral and a #5 gauge for the ...

inspectapedia.com/electric/Underground-Electrical-Service-FAQs.php

a 100-Amp rated electrical service and panel. The wire size you need is ... I have a 150 amp service I need to run 200 feet of wire what size wire do I need.

everythingwhat.com/what-is-the-wire-size-for-150-amp-service

SERVICE ENTRANCE CONDUCTORS SIZE AND RATING Service or Feeder Rating Copper Conductors Aluminum or ... What size wire do I need to feed a 100 amp subpanel?

howtodiscuss.com/t/100-amp-wire-size/35323

What size wire do I need for a 100 amp underground 300 feet run? ... Instead old homes, new homes have 150-200 amp service. But, very large houses may have ...

www.quora.com/What-size-wire-to-feed-100-amp-subpanel

A 100 Amp branch circuit would require #3 AWG Cu or #1 AWG Al wire. A single phase circuit would have 3 conductors, a 3 phase circuit would have 4 wires. If ...

www.homedepot.com/p/questions/Southwire-500-ft-2-2-2-4-Gray-Stranded-AL-SER-Cable-13102915/202316610/2

What size wire do I need to connect my meter to service panel on a 200 amp ... What wire do I need for 100 amp to run 150' of which 100' is inside the home ...

155.138.174.80/what-size-wire-for-50-amp-service-100-feet-away

Apr 12, 2020 ... 25′, 50′, 100′, 150′, 200. Results 1 – 16 of 249 – What size wire for 100 amp service 250 feet. 400 feet away from the main service panel ...

www.camperrules.com/what-size-wire-for-50-amps

To run 50 amps at 150 feet, you can use No. 4 AWG. The larger the wire diameter is defined by the smaller numbers on a wire. What exactly is an electrical range ...

www.paigewire.com/pumpWireCalc.aspx

Three pumps of a pump station (30, 10, and 1 ½ horsepower) are connected to the power source of 460-volts, 3-phase. From table 430-150, they draw 40 amps, 14 ...

plasticinehouse.com/what-size-wire-to-run-to-a-shed

150 Foot Run – A 120-volt circuit on a 20 amp breaker will require 6/2 AWG wire for 150 feet. Above, we mentioned that your shed should use a 10/2 wire when ...

homearise.com/wire-size-100-amp-service-150-feet

Apr 28, 2021 ... You should get 2/0 AWG Copper wire or 4/0 AWG Aluminum wire for single-phase circuits. And, 1/0 AWG Copper wire or 3/0 AWG Aluminum wire if you ...