Web Results

www.engineeringtoolbox.com/green-kiln-dried-pressure...

The density and weight of lumber varies with the water or moisture content in the wood. Typical weights for green, kiln dried and pressure treated lumber boards are indicated in the tables below. Note that nominal dimensions are not the same as actual lumber dimensions .

www.reference.com/home-garden/weight-pressure-treated...

The weight of pressure-treated lumber varies depending on the size of the boards. A 2-by-4-inch lumber board that is 8 feet long has a weight of 17 pounds. A 4-by-12-inch board that is 16 feet long weighs 224 pounds. Pressure treatment is a way of preserving wood to extend its useful life and increase its durability.

www.answers.com/Q/What_is_the_weight_of_pressure_treated...

Approximately 0.024 lbs per cubic inch. A common pressure-treated 2x6 that is 12 feet long (2x6x144 inches) will weigh 38 to 40 pounds.

learnframing.com/calculate-weight-pine-treated-green

The weight of the lumber is automatically returned in pounds. Variations in the Weight of Wood. The weight of pine, green oak, and pressure treated can vary greatly from board to board. This calculator assumes that it has a fairly high moisture content. Exposure to excessive moisture for tree sawn and engineered lumber will also temporarily ...

www.osbornelumber.net/weights--measures.html

*APPROXIMATE WEIGHT CHART* ... IMPORTANT NOTE: Lumber & plywood weights can vary widely depending on the time of year the material was produced and the location of the producing mill. The above listed weights are approximates and are intended as a general guideline only. Actual shipping weights should be verified at the scales.

www.countryplans.com/smf/index.php?topic=3067.0

How much weight does treatment add to the weight of wood? Most of the weight added to treated wood comes from water used to solubilize the preservative components. A freshly treated piece of lumber may contain as much as 4.5 gallons of water per cubic foot or about 38 lbs. per cubic foot.

www.answers.com/Q/What_is_the_weight_of_6x6x12'_Pressure...

Older pressure treated lumber known as CCA was treated with 3 substances, Chrome, Copper, and Arsenic. ... What is the weight of pressure treated lumber 6x6x8'? If dry and stored out of the rain ...

www.hunker.com/12000357/composite-decking-weight-vs-wood

Although some decks are faced with unusual species, such as ironwood and tigerwood, most are still constructed of the softwoods cedar and redwood or pressure-treated pine. Based on the densities of the two common wood species, a 12-foot length of 5/4-by-6 decking would weigh 12.83 pounds (redwood) or 10.54 pounds (cedar).

www.homedepot.com/p/WeatherShield-4-in-x-6-in-x-12-ft-2...

Lumber, pressure-treated lumber, wood, pressure-treated wood, pine lumber, pine wood, 4 in. x 6 in. x 12 ft. lumber, 4 in. x 6 in. x 12 ft. wood; Find the 4 in. x 6 in. x 12 ft. pressure-treated pine lumber 4330254, that's paintable and stainable and a good wood for retaining walls, decks, walkways and other outdoor projects at The Home Depot

www.homedepot.com/p/2-in-x-10-in-x-16-ft-2-Pressure...

Get the 2 in. x 10 in. x 16 ft. Pressure-Treated Pine Lumber 0210162110000, for aboveground use is treated to protect against termites, fungal decay and rot at The Home Depot