Web Results


A Bunsen burner is one of the most common pieces of equipment in the laboratory, and many scientists use it in their work. It is a special burner, which uses flammable natural gases such as methane, or petroleum gases such as propane, to burn and works similarly to a gas stove.


Mastery of the Bunsen burner is a major milestone for any science student. Learn the parts of the Bunsen burner, understand its function and be able to interpret a diagram of science's most famous ...


A Bunsen burner is made up of the base, a barrel with air holes, a collar, a needle valve and a gas hose. Some of these parts can be adjusted to change the properties of the flame that the burner produces. The gas hose is a rubber tube that connects the needle valve inside the base of the Bunsen burner to the gas supply.


What are the different parts of the bunsen burner? Collar, Barrel, Jet, Air hole, Gas tube and base. What is the purpose of a collar? It controls the size of the air hole and controls the amount of air entering the burner. What is the purpose of jet? It forces the gas to rush into the barrel through a small outlet.


The four(4) flame types of Bunsen burner is depending on flow through the throat holes (holes on the side of the Bunsen burner -- not to be confused with the needle valve for gas flow adjustment).


A Bunsen burner, named after Robert Bunsen, is a common piece of laboratory equipment that produces a single open gas flame, which is used for heating, sterilization, and combustion.. The gas can be natural gas (which is mainly methane) or a liquefied petroleum gas, such as propane, butane, or a mixture of both.


Bunsen Burner and Types of Flames Bunsen Burner is still used today as it safely burns a continuous stream of a flammable gas like n atural gas, etc. The amount oxygen mixed with the gas stream determines whether the combustion is complete.


A Bunsen burner is a fairly simply, yet robust method of providing a safe, inexpensive, and consistent heating flame in a laboratory environment. The Bunsen burner is no different from any other combustion device: you need fuel, air, and some kin...


There are two adjustable parts on the Bunsen burner, the knob to control gas flow and the rotation of the collar to control air flow. The gas flow control, adjusts the size of the flame by ...


Bunsen burner: Bunsen burner, device for combining a flammable gas with controlled amounts of air before ignition; it produces a hotter flame than would be possible using the ambient air and gas alone. Named for Robert Bunsen, the German chemist who introduced it in 1855 (from a design by Peter Desdega, who