Web Results

en.wikipedia.org/wiki/Ohm's_law

Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. Introducing the constant of proportionality, the resistance, one arrives at the usual mathematical equation that describes this relationship: =, where I is the current through the conductor in units of amperes, V is the voltage measured across the conductor in...

Ohms Law can be stated mathematically as: I = E/R Where: I is the current, E is the voltage, R is the resistance As you can see from the above formula, if the voltage were to double, then so would ...

www.the12volt.com/ohm/ohms-law.asp

Ohm's Law defines the relationships between (P) power, (E) voltage, (I) current, and (R) resistance. One ohm is the resistance value through which one volt will maintain a current of one ampere.

encyclopedia2.thefreedictionary.com/Ohm's+law

Looking for Ohm's law? Find out information about Ohm&#39;s law. law stating that the electric current i flowing through a given resistance r is equal to the applied voltage v divided by the resistance, or i = v / r.

According to this law the potential difference (voltage) across an ideal conductor is proportional to the current flowing through it. This law can be given as V = IR Where ‘R’ is a constant of proportionality called as ‘résistance. Its unit is ohms. V = potential difference between two points. Its unit is volts. I = Current flowing ...

www.ohmslawcalculator.com/ohms-law-wheel

Ohms Law Wheel; Ohm's law (named after the German physicist Georg Ohm) defines the relationship between Voltage, Current and Resistance. V = I x R. Where: V is the electrical potential (voltage), measured in volts (V), I is the current, measured in Amperes (Amps/A), and; R is the resistance, measured in Ohms (Ω).

www.authorstream.com/Presentation/aSGuest133026-1397611-ohm-39-s-law

Ohm’s Law Memory Aid : Ohm’s Law Memory Aid To calculate one unit of electricity when the other two are known, simply use your finger and cover the unit you do not know. For example, if both voltage (V) and resistance (R) are known, cover the letter/(amperes).