Web Results

partsandprojects.com/projects-and-features/auto-projects/...

Complete factory style replacement kickdown kits are available for less than forty bucks. We installed a Scott Drake kickdown kit, which comes with everything you need, except instructions. No kidding. So, here’s how to install and adjust the kickdown cable linkage on your classic Mustang.

www.lokar.com/assets/instructions/INS0007-FordC4C6-KickdownKit.pdf

cable adjuster from the new kickdown cable. Leave the kickdown mounting bracket on the kickdown cable adjuster. DO NOT remove the ferrule if the cable housing is braided stainless steel! Remove the inner wire from the cable housing, and remove the kickdown lever from the inner wire. Step 2: Install the kickdown lever onto the transmission, with ...

www.autopartswarehouse.com/automatic-transmission-kickdown...

Step 7: Follow steps 4 and 5 in reverse order to install the new automatic transmission kickdown cable. Step 8: Reconnect the negative cable to your battery and close the hood of your car. Now that you've installed a new kick down cable, take your car for a spin to test-drive the new part.

www.lokar.com/assets/instructions/INS0003-GMhitech-KickdownKit.pdf

Step 7:Remove the kickdown cable housing from the transmission. Re-install the inner wire into the kickdown cable housing. Step 8:On the trans tube at the transmission end of the Kickdown Cable there will be either one or two o-ring grooves. TH350 & TH200 use one o-ring, and the 700-R4, TH200-4R, and 4L60 use two o-rings.

static.summitracing.com/.../LOK-INS0006-FordC4-KickdownKit.pdf

Step 1: Remove the cable end stop, kickdown throttle body fitting, and kickdown cable adjuster from the new Lokar kickdown cable. Remove the inner wire from the cable housing, and remove the kickdown lever from the inner wire. Step 2: Install the kickdown lever onto the transmission, with the cable hole towards the transmission as shown in Fig. 3.

www.jegs.com/p/Lokar/Lokar-Custom-Fit-Stainless-Steel...

Lokar transmission kickdown cable kits are a custom ''U-Cut-to-Fit'' design that will work in virtually any application. They feature a braided stainless steel housing and specially extruded liner that helps extend the life of the cable for years of reliable service.

www.cjponyparts.com/mustang-transmission-kick-down-cable...

If the automatic transmission in your 1966-1968 Mustang is struggling to downshift properly, the problem might be your aging Transmission Kick Down Cable. This new Transmission Kick Down Cable Kit from Scott Drake includes everything you need to replace it, including quality cable, lever, spring & bracket, plus hardware for an easy installation.

www.yourmechanic.com/.../how-to-replace-a-car-kickdown-cable

Note: The installation of the kickdown cable is typically easier to install by connecting it to the carburetor/throttle body first, but in some instances it will be necessary to install the transmission end first. Simply perform the following steps in the order needed to complete the task. Step 9: Install the cable onto the mounting bracket ...