A vehicle's timing belt controls the camshaft and crankshaft rotation, opening and closing the valves to smoothly operate the vehicle. It is so named as it turns the camshaft in sync timing with the crankshaft. On some engines, a timing belt failure causes catastrophic damage to the engine.
The timing belt connects a vehicle's crankshaft and camshaft. Timing belts also play a crucial role in the proper operation of an engine's pistons and valves.
To install a timing belt after removing the previous belt, insert the new timing belt on the camshaft teeth and crankshaft sprockets. Turn the crankshaft pulley all the way around twice to secure the belt on the sprockets, and verify the timing marks are correct. While timing belt installation varie
A timing belt is normally replaced every 50,000 to 100,000 miles, but replacement intervals vary between car manufacturers. Check the owner's manual or an online maintenance schedule for replacement interval rates for a specific vehicle.
To check a car’s timing belt, first remove the cover to access the belt, and then inspect the belt for problems such as cracks, contaminants that could cause degradation, and damaged or broken teeth. It is also important to check the belt’s tension to determine if it has become stretched.
Timing belts can be replaced and installed at chain mechanic shops such as Pep Boys, as well as at most auto repair shops and mechanics that specialize in the type of vehicle that the belt needs to be installed into. Timing belt replacements are common repairs that need to be done on vehicles, which
When a timing belt breaks, the engine of the car stops working. Often, there is a loud clunking sound right before the timing belt breaks. It is impossible to drive a car with a broken timing belt because the belt regulates the movement of the crankshaft and the camshaft.
In order to replace the timing belt on a car the coolant needs to be drained, timing belt covers, alternator pulley, crankshaft pulley, valve cover and old belt all have to be removed. After that, the timing belt will need to be properly adjusted and timed so the engine does not become damaged.
To replace the car's timing belt, degrease the engine, drain the coolant, remove the old belt, insert a new belt in the place of the old one, replace the crankshaft seal with a new one and refill the coolant. For proper replacement instructions, refer to the owner's manual.
The average cost to replace the timing belt ranges from $150 to $1,000, as of 2015. The range in price is based on the type of car and the cost of labor. This is a labor-intensive job that may take as many as eight hours.