Web Results


The Brinell test was one of the first widely accepted hardness tests for indentation hardness measurement. In Brinell test, a steel ball of 10 mm diameter is used as an indenter to create an impression on the test piece to calculate its Brinell hardness number.


The QATM hardness tester portfolio covers all standard test methods, such as Vickers, Brinell, Knoop & Rockwell, as well as a wide test load range. The entire hardness tester range is characterized by technological innovation, precise measuring instruments and maximum comfort due to automation and advanced interfaces.


Hardness tester, device that indicates the hardness of a material, usually by measuring the effect on its surface of a localized penetration by a standardized rounded or pointed indenter of diamond, carbide, or hard steel. Brinell hardness is determined by forcing a hardened steel or carbide ball


The PTC® Model 316 Portable Steel Hardness Tester measures hardness in the range of 20 to 65 HRC (equivalent Rockwell C Scale) with an accuracy of ± 1.5 points. A hand-held impact indenter drives a Ø 0.0625 in. (1/16 in. diameter) carbide ball into the sample with a calibrated impact.


Simply put, the Rockwell hardness test is a method of measuring the hardness of materials. The Rockwell hardness scale is typically administered to characterize the hardness of metals, such as thin steel, cemented carbides, lead, aluminum, zinc, copper alloys, titanium, and iron.But the scale is also administered to test certain plastics.


Brinell Testing is a fairly simple test but the most destructive type. It requires more sample preparation and can at times require destruction of a finished part. A defined load of 500-kg to 3000-kg is applied through a 10 mm hardened steel ball indenter and the subsequent impression is measured.


International Standards Organization – Rockwell Hardness Test Part 1 – Test Method (ISO 6508-1 Metallic Materials) The reason all steel product manufacturers use the Rockwell hardness scale is that it allows uniformity in reporting test results.


Steel Hardness Conversion Table. This table shows approximate hardness of steel using Brinell, Rockwell B and C and Vickers scales. These conversion charts are provided for guidance only as each scales uses different methods of measuring hardness. The right hand column show an approximate equivalent tensile strength.


The hardness tester resets automatically, tests the tablet samples with loop and can hold up to 100 samples printing results as a group. Model YD-2 fulfils USP <1217> on tablet orientation and 3-point calibration to ensure accuracy in tablet hardness testing. It comes with the calibration procedure as well. · YD-3 Automatic Tablet Hardness Tester


Founded as a partnership Company under the name and style of "BLUE STEEL ENGINEERS", was incorporated in the year 1968 as a Private Limited Company under the name and style of "BLUE STEEL ENGINEERS PVT.LTD." All the Company's Directors are highly qualified technocrats widely traveled throughout the world.