Web Results


Mar 6, 2019 ... NI recommends a torque value of 5 to 9 in*lbs (56 to 100 N*cm). You can find more information on properly torquing connections by viewing RF ...


Recommended Torque setting for Brass SMA connectors · Cost-effective tool for making repeatable measurements · Supplied directly by Huber & Suhner to SDR-Kits.


Buy 141-0000-930 - Johnson - Cinch Connectivity - Torque Wrench for SMA Brass Connectors, 8mm Drive, 5in-lb, 0.56N-m, 164 mm L. Newark offers fast quotes, ...


Part No. Description. HTW-516-05, SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 5.0 ±0.2 In.lbs (0.56 ±0.02 Nm).


Jan 26, 2019 ... For SMA you might want to go for 5 in/lb. The 8 in/lb spec is more generally used for 3.5mm. If mating the two the torque spec follows the male ...


The TW-S is a SMA Type, proof coupling torque wrench used for SMA 3.5mm, 2.92mm, 2.4mm and 1.85mm Type Connectors. HEX size: 8.0mm.


WR-ToolRF Torque Wrench for SMA & RPSMA Plugs. All the details on our product families in the Würth Elektronik catalog.


SMA (5/16) Torque Wrench designed to fit between connector nuts, allowing a technician to properly torque each connector in limited access areas.


3036TW Torque Wrench 9/16 For SMA Hermetic Type Connectors. Available from Coaxicom in the USA.


TOOLING / TORQUE WRENCH|SMA PLUGS, 30 IN-LBS. TA-0432. Brand: AEP. Product Type: Tooling. Specific Feature: TORQUE WRENCH. Click here to check availability.


Due to the nature of the design if you torque a brass SMA to the specified torque of 7-10 ... For 3.5mm, 2.92mm, and 1.85mm recommended torque is 8 in-lbs.