Web Results
www.magnum-dimensions.com/sites/default/files/MagDocs/64-0067%20Rev%20A%20%28PT-100%20Charge%20Controller%29_Web.pdf

#2 Phillips screwdriver. • Pliers. • Wire strippers. • Drill and drill bits. • Pencil or marker. • Multimeter. • #2 -3 Slotted screwdriver. • Torque wrench.

belfuse.com/resources/datasheets/cinchconnectivitysolutions/johnson/ds-ccs-john-torque-wrenches-series.pdf

RF torque wrenches are used to precisely tighten connections between RF devices and systems. ... For 3.5mm, 2.92mm, 2.4mm, 1.85mm and SMA Connectors.

www.svmicrowave.com/parts/2-92mm-female-solderless-litetouch-pcb-connector-2-hole-stripline/sf1521-60124

Mating Torque, 7 - 10 in - lbs. Inter-mate ability, SMA, 3.5mm. Environmental. Temperature Rating, -65°C to +165°C. Corrosion (Salt Spray), MIL-STD-202, ...

www.kgplogistics.com/docs/overstock_ad.pdf

Wrench Security Shield Tool Long. 2.28. $. OUTSIDE PLANT. CABINETS-OSP. EMERSON NETWORK POWER. TR75LTT. 0000288111. Tool Locking Terminator Viewsonics.

rfshop.com.au/product/huber-suhner-74_z-0-0-80-sma-hermetic-torque-wrench

The Huber Suhner 74Z-0-0-80 steel SMA torque wrench is designed for use on hermetically sealed SMA connectors. It has a torque of 1.95 Newton-meters (17.26 ...

www.arihav.com/UpdatedStockFiles/Stock37.php

SA5093 ( as Amphenol p/n 901-10019B ), 2011, TAIWAN, 0, SMA jack for END PCB SOLDER MOUNT ... UPL20-5, 2012, N/A, 1, BNC Plug, 75 Ohm Wrench CRMP, STR.

docs.novatel.com/oem7/Content/PDFs/PwrPak7_Installation_Operation_Manual.pdf

Use an SMA torque wrench to tighten the connections to 0.9 Nꞏm (8 in-lbs) ... The fuse and holder are made by Cooper/Bussmann; available from Digikey.

montagebau-friedrich.de/adf4351-schematic.html

It contains the ADF4351 integrated synthesizer and VCO, SMA connectors for ... by Kurt Poulsen: 3D printed SMA torque wrench: Reinier Gerritsen: 4 Replies: ...

connectorsupplier.com/september-2020-new-connectivity-products-ii

Sep 29, 2020 ... The new SNAP! connectors are installed with a common wrench, ... and have a nut that snaps off at a pre-set torque, leaving a heavy sleeve ...

jeepwang.com/rf-probe-kit

20 hours ago ... ... and connect the cables and torque using relevant wrench • Use IPA and ... Kit,Frequency 1Mhz-7GHz, SMA Male Thread (4Pcs) $28.79 $ 28 .