To program a car remote, switch on the dash light, press Lock on the remote, and switch off the dash lights. Repeat this step in quick succession four times, and allow the system to enter the programming mode. Now, press... More »

To program a car's keyless remote entry system, close all the doors of the vehicle, switch on the dashboard lights using the key, and press Lock on the car's remote for a brief period. Then, switch off the dashboard ligh... More »

Different vehicle and keyless remote manufacturers have different ways of programming their products. The most common procedure involves inserting the key in the ignition, pressing the power button on and off several tim... More »

www.reference.com Vehicles Car Parts & Maintenance

To program a car's keyless remote entry system, close all the doors of the vehicle, switch on the dashboard lights using the key, and press Lock on the car's remote for a brief period. Then, switch off the dashboard ligh... More »

A car alarm without a remote can be disarmed by opening the door with the conventional key and then locating the valet switch. Upon entering, the alarm sounds. Locate the switch immediately, insert the key into the ignit... More »

To reprogram your car key, set the car on "program" mode, press a button on the key fob to synchronize the fob with the car, and then test the key fob to complete this process. This procedure may, however, vary from one ... More »

To use remote start on a Jeep Cherokee, press and release the remote start button on the transmitter two times within five seconds. The vehicle's doors lock, the parking lights flash and the horn chirps before the vehicl... More »