The average cost to replace the timing belt ranges from $150 to $1,000, as of 2015. The range in price is based on the type of car and the cost of labor. This is a labor-intensive job that may take as many as eight hours.
A vehicle's timing belt controls the camshaft and crankshaft rotation, opening and closing the valves to smoothly operate the vehicle. It is so named as it turns the camshaft in sync timing with the crankshaft. On some engines, a timing belt failure causes catastrophic damage to the engine.
The average cost for replacing a timing belt depends on the make and model of the vehicle. According to CostHelper.com, the cost for passenger cars varies between $179 to $942, with an average cost of $449. A timing belt for an SUV or minivan costs between $502 to $950, with an average of $736.
To install a timing belt after removing the previous belt, insert the new timing belt on the camshaft teeth and crankshaft sprockets. Turn the crankshaft pulley all the way around twice to secure the belt on the sprockets, and verify the timing marks are correct. While timing belt installation varie
The timing belt connects a vehicle's crankshaft and camshaft. Timing belts also play a crucial role in the proper operation of an engine's pistons and valves.
A timing belt is normally replaced every 50,000 to 100,000 miles, but replacement intervals vary between car manufacturers. Check the owner's manual or an online maintenance schedule for replacement interval rates for a specific vehicle.
The average cost of having the timing belt replaced on a standard vehicle is $449, as of 2015. The average cost for a standard SUV or minivan is $736.
To check a car’s timing belt, first remove the cover to access the belt, and then inspect the belt for problems such as cracks, contaminants that could cause degradation, and damaged or broken teeth. It is also important to check the belt’s tension to determine if it has become stretched.
In order to replace the timing belt on a car the coolant needs to be drained, timing belt covers, alternator pulley, crankshaft pulley, valve cover and old belt all have to be removed. After that, the timing belt will need to be properly adjusted and timed so the engine does not become damaged.
To replace the car's timing belt, degrease the engine, drain the coolant, remove the old belt, insert a new belt in the place of the old one, replace the crankshaft seal with a new one and refill the coolant. For proper replacement instructions, refer to the owner's manual.