articles

Place the power box near the outdoor electrical outlet on the home, lay the power cables out in the desired area, and dig a trench that is approximately 3 inches deep along the power cable route. Connect each light to th... More »

www.reference.com Home & Garden Decor Lighting

To repair a landscape lighting system, check for any damage or loosely connected wires. Check if the fuses, breakers and bulbs are blown out, test the functioning of the photocell, and replace these parts if necessary. A... More »

www.reference.com Home & Garden Home Maintenance Electrical

Plow and Hearth Solar Path Lights and Westinghouse Kenbury Solar Outdoor Garden Pathway LED Stake Lights are good solar-powered landscape lighting products, according to Survival Renewable Energy. The Nekteck Outdoor Sol... More »

www.reference.com Home & Garden Gardening & Landscapes Landscaping
similar articles

Soffit lighting should be installed in an area where there is at least 5 inches of space for the lights to be placed, the cable should be installed to reach from the switch to the light, the wiring box should be connecte... More »

www.reference.com Home & Garden Home Maintenance

To add and wire a 110-volt electrical outlet, turn off the power, cut the hole for the new electrical box, pull out the electrical cable and attach the wires to the outlet. Consult an electrician to wire the new outlet t... More »

www.reference.com Home & Garden Home Maintenance Electrical

Outdoor lighting timers can be used to control landscape lighting, lamp post lights, accents lights and even flood lights. Security lighting can also be connected to a timer, turning on just before dusk and off after daw... More »

www.reference.com Home & Garden Decor Lighting

To wire an outlet for an electric stove, install the gang box appropriately, pull a few inches of the circuit breaker cable through it, and remove the insulation from the three wires within. Connect these wires to the su... More »

www.reference.com Home & Garden Appliances Ovens & Ranges