articles

Repairing the wiring of a three-socket lamp involves removing the lamp shade, light bulb and harp section to get to the socket shell. Remove the socket, loosen screws holding wires in place and remove the wires. Connect ... More »

Some different types of replacement parts for lamps include sockets, cords, plugs, fixtures and switches. The most common replacement part for a lamp is a light bulb; check to make sure that the light bulb is okay before... More »

Antique Lamp Supply, Macy's and Chairish are among the retailers that sell antique-styled glass lamps, as of 2015. The available inventory, merchandise condition and prices vary by retailer. More »

similar articles

Replace a three-way light switch by unplugging the lamp, removing the shade, harp and light bulb, pulling the outer housing off the socket and loosening the wires from the screws. Loosen the set screw, unscrew the socket... More »

To repair a table lamp switch, replace the bulb, tighten or reattach any loosely attached or broken terminal wires inside the socket respectively if the new bulb fails to light, and then replace the socket if the bulb st... More »

The wiring diagram for a two-way switch starts at the power source and ends at the light bulb. It shows the black hot wire feeding from the switch to the housing where the bulb is attached. A white neutral wire from the ... More »

Install a Yada wireless backup camera by locating the wiring of reverse tail lights in your rear hatch or track, removing the light bulb socket, determining the power of reverse wires, connecting the power cable, and det... More »