Some drawer cabinet parts that can be replaced include the doors, drawer bottoms and fronts, hinges, knobs and pulls, slides and cabinets, among others. Some companies also repair, rebuild and resize drawers, so consumer... More »

www.reference.com Home & Garden Home Maintenance

To whitewash cabinets, remove the doors and the hardware, such as the drawer pulls, and clean the cabinets thoroughly. Strip the cabinets with a stripping agent, and sand the cabinets with medium-grit sandpaper until the... More »

www.reference.com Home & Garden Furniture

To install kitchen drawer inserts, begin by removing the drawers for the easiest access and installation. Measure the inside of each drawer's width and length and write down its exact measurements. More »

www.reference.com Home & Garden Home Maintenance

Reface Formica cabinets by first removing the cabinet hardware and placing the doors on a flat, stable surface. Using rubber gloves and goggles, apply lacquer solvent at the laminate edges, and then use a heat gun to act... More »

www.reference.com Home & Garden Home Maintenance

Install cabinet knobs by marking the holes for the knobs with a template and drilling through the mark with a drill bit the same size as the cabinet knob's screw. Place the screw in the hole from the back side of the cab... More »

www.reference.com Home & Garden Home Maintenance

Repainting cabinet hinges involves removing the hinges from the cabinet, cleaning the hinges to remove old paint and dirt, and spraying the hinges with new paint. Allowing the paint to dry before replacing the hinges on ... More »

www.reference.com Home & Garden Home Maintenance

The best method for painting metal cabinets involves using a paint roller to roll the paint on the cabinet. Preparing the cabinet is an important first step to achieving the best results. More »

www.reference.com Home & Garden Home Maintenance