To kill black mold, wash the moldy area with detergent, then coat it with a bleach and water solution. Finally, apply a borate-based solution to the area. Allow the surface to dry completely between each step. More »

www.reference.com Home & Garden Cleaning

To kill mold with bleach, use a ratio of 1 cup bleach for every gallon of water. Bleach can only effectively kill mold on nonporous surfaces as it is unable to penetrate into materials with deep pores such as cinder bloc... More »

www.reference.com Home & Garden Pest Control

Chlorine bleach can be used to destroy living organisms such as black mold. However, chemicals like bleach are not recommended for use in routine mold cleanup. Bleach should never be mixed with other cleaning solutions o... More »

To remove black mold, wash the affected area with detergent, and disinfect the area to kill the mold spores. It is necessary to eliminate any sources of moisture in the room to remove the mold successfully. The removal p... More »

To remove black mold, prepare the area by sealing vents and doorways with plastic sheeting and duct tape, open windows to ventilate the area, and wash all contaminated surfaces with detergent and water. Always wear safet... More »

www.reference.com Home & Garden Cleaning

To clean black mold, wash the surface of the material with soap and water, and then disinfect the area with bleach or a commercial mold killer. Some porous materials must be replaced if the mold cannot be removed. More »

www.reference.com Home & Garden Cleaning

To remove wall mold, use a solution of chlorine bleach and water on the mold, and use a stiff brush to scrub the infected area. Rinse the wall thoroughly, and allow it to dry. Seal the dry clean wall to prevent moisture ... More »