Web Results


To install paneling, allow the paneling to acclimate to the home's climate for 24 to 48 hours, and install 1/2-inch furring strips cut that are 11 inches wide. Cut the panels 1/4 inch shorter than the existing wall, and cut holes in the panel for electrical outlets or other features. Secure the pane


Different types of interior wood panels include stone panels, fiberglass panels, raised panels, bead board and flat panels. These products come in a variety of finishes or colors.


Insulate existing walls by locating the wall studs, drilling a hole into the bottom of the wall, checking the cavity for obstructions, blowing insulation into the cavity, and repeating between each set of studs. Patch the holes once the job is complete.


The Home Depot, Office Depot and BuildDirect offer decorative wall panels for interior design. Pier 1 Imports also sells a variety of wall panels, plaques, mirrors and signs.


Some design ideas for interior wooden wall panels include horizontal slat paneling, sheets of grained wood in multiple sizes and wide-plank, vertical timber paneling. These panels work well in contemporary designs. Other options are to use reclaimed wooden panels as an accent wall or paint the panel


Some ways to insulate existing walls include loose fiberglass insulation, cellulose or spray foam. Curtains and wall coverings are also a handy way to insulate existing rooms.


Interior paneling sheets are used as insulation, covering and to enhance the interior decor of a room. They cover up electrical insulation. Often, the paneling is wood and used to confer a more vintage feel to the modern home.


Use rigid foam insulation panels by cutting the panels to size and friction fitting them between studs, floor joists or roof rafters. Friction fitting means wedging the panel between the wooden planks so that it stays firmly in place during high winds, earthquakes or other unstable events.


To replace the interior wall paneling of a recreational vehicle, begin by removing the existing paneling and interior trim with a pry bar, and look for any structural damage underneath. If there is any water damage, remove the affected insulation, and allow the structural members to dry completely.


Tips for framing interior walls include maintaining proper spacing between studs, conserving space by using two-by-four studs and plates, using lighter headers over doors and making adjustments for adjacent walls that are not plumb. While the interior walls you add after the construction of a home a