Web Results


Making a sundial is something we've wanted to do for a long time. As with any project we do, we wanted to make it a bit different. Rather than making it with a standard round dial plate we went with a leaf for the plate. We learned a lot along the way and we were pretty happy with the end result. What you'll need


How to Make a Sundial. A sundial is a device that uses the position of the sun to reflect the time. An upright stick, called a gnomon, is positioned to cast a shadow onto a pre-marked sundial face. As the sun moves across the sky, the shadow also moves. The concept can be easily demonstrated in your backyard with a...


How to Make a Sundial: Download and print the “How to Make a Sundial” teaching resource. Follow the instructions to assemble the sundial. At midday, position your sundial as directed and secure it to the ground. You may like to use sticky tack to hold the paper plate sundial down on the ground, rather than thumbtacks.


Build a sundial for the yard or garden, including making the sundial face, preparing and placing the sundial post, attaching the face and setting the time.


How to Make a Sundial. Sundials have been used for thousands of years to tell time. You can make this simple horizontal sundial in just an hour or two. Use a disk made from wood or heavy cardboard for the base of your sundial. Mark its center with a pen or pencil. Choose an item for the gnomon, or ...


How to Set up a Sundial in a Garden ... If year-round accuracy is important to you, make sure the dial isn't fixed into concrete and can move. You can make a sundial of sorts by pounding a stake in the ground and arranging flowers behind it to act as a dial face. Make sure you plant the flowers on the north side of the stake.


Sundials measure time by the position of the sun. They can be amazingly accurate, and are surprisingly simple to make. The instructions here are for a basic sundial similar to the rudimentary stone versions once used. Called gnomons, these sundials consisted of a vertical stick or pillar that cast a shadow on sunny days.


The sundial you constructed at Hila is designed to work at latitudes close to 45 degrees, i.e. Ottawa. To set up your sundial, find a place with as much exposure to the sun as possible. Mount the sundial on top of a post , use a level to make sure the face of the sundial is level.


Instead, use a vertical sundial and follow the packaging instructions to set it up and point the gnomon correctly. At the equator, the sun rises along the eastern horizon and moves straight up, then sets on the western horizon. If you used a horizontal sundial, the shadow would fall mostly west in the morning and mostly east in the afternoon ...