Web Results


For instance, the clear coat might be peeling away but the paint job remains intact, or the paint job may be damaged as well. Let’s dive in. Method A: Replace the Peeling Clear Coat. If the clear coat is peeling, but the paint is in good condition, then you will only need to replace the coat on the affected area.


Clear Coat Peeling: Damage Done By UV Radiation And Rock Chips How Cold Weather Damages the Clear Coat. Cities like Aspen, Basalt, Carbondale, Snowmass get cold winters with heavy snow. Cold weather and salt on our roads eat over the clear coat so the color coat is exposed and gets damaged over time. This is why regular waxing is required ...


The clear coat is already on. The bulk of the chore is over. Just a little more work needed to smooth things out before you can enjoy the results. Peel Off Masking Once Final Coat Dries. Once the last coat you applied has dried, take off the covering you applied. Peel the tape off (and newspaper, if you used it) and throw it away.


The clear coat is peeling and there is no cheap do at home product that will yield satisfactory results.The hood needs to be professionally refinished.The minor scratches may come out with a rubbing compound that is applied like regular paste wax.


Oxide Reducing Emulsion to Restore Faded, Oxidized or Sun Damaged Car Paint, Peeling Clear Coat and Dull Headlights in a Simple DIY Operation. Easier to apply than wax, needs no polishing. 3.8 out of 5 stars 250. $31.75 $ 31. 75. FREE Shipping.


Re: Removing Clear Coat off Gel Coat? Finally!! I found what works. After a week of trying Floor Strippers, sanding and scraping. I found a product called "Auto-Strip". It comes in an aerosol spray can and has a foam like application. I'm spraying it on, lettting it sit for 15-20 minutes. The "clear-coat" is bubbling and curling up off the gel ...


Intact AR coating reduces glare and lets your peepers shine through more clearly, but a peeling anti-glare coat impairs both your sight and your style. You can remedy the issue with a bit of sunscreen, though it means losing the coating for good.


Any way to gently remove clearcoat without removing the underlying paint? My Honda is peeling, but the underlying basecoat looks ok. Tips and suggestions please . P71 Dork 2/18/09 11:32 a.m. ... since there is a problem with the clear coat to color coat bond. I have the Harbor Freight HVLP. I believe it's a SATA knockoff.


There's no need to sand orange peel from the color coat. The clear will burn into it. You only need to wet sand the clear coat. Be sure enough is applied so you dont sand through it. But not too thick or it will never cure. Let it harden/cure for a month before wet sanding. Lots of good material to read at guitar reranch.


Kean-Strip makes a product called "Peeler" that purports to remove peeling OEM clearcoat. The label warns that over application may damage the OEM primer, and that Peeler may remove any non-OEM finishes. It doesn't appear that it is intended to either remove solidly adhered clearcoat, nor preserve the basecoat. I've never used the product.