Web Results
www.usgs.gov/special-topic/water-science-school/science/saline-water-and-salinity

If water has a concentration of 10,000 ppm of dissolved salts, then one percent (10,000 ... The second chart shows that almost all saline withdrawals, ...

www.aqueon.com/articles/hard-water-aquarium-fish

For aquarium purposes, General Hardness and Carbonate Hardness are measured in degrees (dH and dKH respectively), or parts per million (ppm). GENERAL HARDNESS ...

www.citizensenergygroup.com/My-Home/Utility-Services/Water/Water-Quality/Westfield-Water-Quality-Data

The chart below gives you a quick look at some of the substances that the EPA ... Chloride (ppm), N/A, 250, 39, 66, 18 - 66, N/A, Natural deposits; water ...

www.slcdocs.com/utilities/PDF%20Files/Annual%20Reports/DRINK%20UP%202012.pdf

the Partnership for Safe Water, Utah Water Quality ... allows hard water scale to form, so you may see more calcium carbonate- ... HOW TO READ THE CHART.

www.sugarlandtx.gov/329/Water-Quality

Typical Hardness Ranges · Soft: 0 to 17 ppm / 0 to 1 gpg · Slightly hard: 17.1 to 60 ppm / 1 to 3.5 gpg · Moderately hard: 61 to 120 ppm / 3.5 to 7 gpg ·...

www.kinetico.co.uk/hard-and-soft-water-explained/hard-and-soft-water-uk

Measuring water hardness. Water hardness is measured by the number of mineral deposits in your water (parts per million – ppm). A soft water area would have ...

www.anglianwater.co.uk/help-and-advice/drinking-water-advice/hard-water

Find out what causes hard water and how to test the levels in your water supply.

dallascityhall.com/departments/waterutilities/DCH%20Documents/pdf/2k_wqr.pdf

Is Dallas water hard or soft? A. Hardness refers to the calcium and magnesium content. Dallas' water is considered moderately hard. Q ...

www.sandiego.gov/public-utilities/water-quality

Water Hardness. Typically, drinking water in San Diego averages about 16 grains per gallon (gr/gal) or 276 parts per million (ppm) ...

images.homedepot-static.com/catalog/pdfImages/8a/8ab89154-4cd4-4136-b811-c31190296b76.pdf

compensate for it by adding to the water hardness number. For example, assume your water is 20 gpg hard and contains 2 ppm iron.

www.cleanwaterstore.com/blog/get-it-straight-hard-truths-about-soft-water

At levels of 100 to 200 ppm (or approximately 6 to 12 grains per gallon of hardness) water softening or a no-salt water conditioner is an excellent money-saving ...