To install a grab bar, locate the wall studs, mark the position of the bar, drill the necessary holes, apply caulk to the base, and drill the bar into place. Test the grab bar after installation to ensure it is safe. More »

www.reference.com Home & Garden Home Maintenance Carpentry

A toilet grab bar should be mounted 33 to 36 inches above the floor. The Americans With Disabilities Act requires one to the rear of the toilet and one on the wall closest to the toilet in buildings and facilities. More »

The process of installing a shower grab bar involves locating and marking the wall studs, drilling mounting screws and then installing the bar. Use flange covers to protect the mounting hardware and wall-mounted anchors ... More »

www.reference.com Home & Garden Home Maintenance Plumbing

Install a grab bar in a bathtub by locating the wall studs, marking the location of the screws and predrilling the holes for the screws. Use the screws to attach the mounting hardware to the wall, and then attach the gra... More »

www.reference.com Home & Garden Home Maintenance

To frame a basement wall, mark the position of the studs, assemble the frame on the floor, slide it into place, and secure with nails. Repeat for as many wall frames as necessary to complete the project. More »

www.reference.com Home & Garden Home Maintenance Carpentry

The process of installing a shower grab bar involves locating and marking the wall studs, drilling mounting screws and then installing the bar. Use flange covers to protect the mounting hardware and wall-mounted anchors ... More »

www.reference.com Home & Garden Home Maintenance Plumbing

To install indoor wall paneling, measure the length and height of the coverage area, calculate the number of planks required, remove base molding, find studs in the wall, attach the baseboards and attach the paneling abo... More »

www.reference.com Home & Garden Home Maintenance Carpentry