Here is one for the Small and BIG block Chevrolet engines. It does not work for LSX series as they use a different firing order.Everything is front view, engine and distributors. Also both types of caps are shown, HEI and old school Points Style.
At this site you can find the firing orders for Chevrolet engines.
Most small block Chevy’s use a HEI distributor which stands for “High Energy Ignition.” On a small block Chevy V8 engine, the distributor cap firing order is in a clockwise rotation. In most cases it doesn’t matter where the number one position is on your distributor cap, as long as the plug wires are in the correct firing order.
“What is the firing order of a Chevrolet 350 smallblock engine?” 1–8–4–3–6–5–7–2. Number one cylinder is, as you stand in front of the car looking at the engine, on your right hand, the closest cylinder. The cylinder numbers alternate between bank...
Firing Order for Chevrolet 350 Small block engine. If you are looking at a factory manufactured camshaft then expect an order of 1-8-4-3-6-5-7-2 but if you have 4/7 swap camshaft expect a firing order of 1-8-7-3-6-5-4-2. If you have replaced the camshafts to ones with another firing order, your ignition cables are switched also.
Chevy Small-Block Firing Order and Torque Sequences - Covers Engines: 262, 265, 267, 283, 302, 305, 327, 350, and 400-ci
How to : Small or Big Block Chevy Firing Order Explained - Duration: 1:44. minthillbilly 64,783 views. ... Small Block Chevy Build Stage 3: 383 Becomes A 406 To Make Mega Horsepower ...
For the Chevy 350, the HEI Distributor Cap follows the same firing order as the engine: 1-8-4-3-6-5-7-2. On a small block Chevy V8 engine, the distributor cap firing order is in a clockwise rotation. In most cases it doesn’t matter where the number one position is on your distributor cap, as long as the plug wires are in the correct firing order.
Listed above we have a diagram of the distributor rotation, cylinder order, and firing order. Listed below are some of the most important torque specifications and torque sequences that are helpful to anyone building a small block Chevy.
The standard GM firing order that’s been used in traditional small- and big-block engines is 1-8-4-3-6-5-7-2. By comparison, this is identical to the firing order for the original small-block Ford (260-289-302) as well as the FE and 385 series of engines when the two platforms are overlapped.