Web Results

www.reference.com/world-view/many-faces-cone-f8d14df9d58b1804

A cone has one face. It is a three-dimensional shape with a circular base, one side and one vertex. Faces can be identified as the flat surfaces on a three-dimensional figure.

www.reference.com/article/many-curved-faces-cone-ceb339b2ca20b93a

A cone has a singular curved face. Cones consist of two main parts: a circular base and a curved top that spans from the outside of the base to a single point at the top.

www.reference.com/article/make-paper-cone-d0d8a71a6fe61c7d

A paper cone is easily made by cutting out a half-circle of paper and connecting the two ends together such that both halves of the straight edge line up. The cone shape can be held together by glue, tape or a staple.

www.reference.com/article/can-one-make-cone-out-paper-df65006d153c83e5

Paper cones can be fashioned using one of two methods: one method starts with a semicircular piece of paper that is then bent into a cone, and the other method starts with a diamond-shaped piece of paper that is rolled into a cone. Both techniques require the use of paper, scissors, a ruler, a penci

www.reference.com/world-view/many-faces-edges-corners-cone-e2e103de80dc2f00

A cone has one face, one edge and no corners. A cone is defined as a hollow or solid object with a circular base that tapers upward to a point.

www.reference.com/world-view/properties-cone-e1a2d17933b02b98

A cone is a geometrical figure with one curved surface and one circular surface at the bottom. The top of the curved surface is called the apex of the cone. An edge that joins the curved surface with the circular surface is called the curved edge of the cone.

www.reference.com/world-view/many-edges-cone-e12098f06fc0e008

A cone has one edge. The edge appears at the intersection of of the circular plane surface with the curved surface originating from the cone's vertex.

www.reference.com/article/surface-area-cone-57692cbcb3856878

Calculate the surface area of a cone by first finding the area of the slanted section on top and the area of the base. Add these two areas together to get the total surface area of the cone.

www.reference.com/article/volume-cone-1ded1401bc64da9b

The volume of a cone is found by multiplying the area of the circular base by the height of the cone, and then dividing the product by 3. The area of the base is found by taking the square of the radius and multiplying it by pi.

www.reference.com/article/volume-right-cone-5161d0e19997de11

Finding the volume of a right cone is a simple process when you are equipped with a few linear measurements. In order to find the volume of a right cone, you need access to information about the cone, a calculator, a pencil and some paper.