articles

Cut crown molding by clamping a piece upright to a miter saw and cutting. The timing of this project depends on the amount of crown molding you need to cut. You need a power miter saw, crown molding, a cleat and a clamp. More »

www.reference.com Home & Garden Home Maintenance Carpentry

In order to cut crown molding into angles, first place the molding in a miter box upside down with the molding against the sides and bottom of the box like it is against the ceiling and wall. Cut a 45-degree angle into t... More »

www.reference.com Home & Garden Doors, Windows, & Locks

To cut crown molding corners, first put the molding upside down in a miter box, making sure it is braced on the back and side of the box, and then cut the molding at a 45-degree angle with a hand saw. This method works f... More »

www.reference.com Home & Garden Home Maintenance Carpentry
similar articles

To miter crown molding, set the miter and bevel angle of a compound miter saw as required. Cut the left inside and right outside corners and right inside and left outside corners of the molding by positioning it appropri... More »

www.reference.com Home & Garden Home Maintenance Carpentry

To cut a 90-degree inside corner in crown molding, use a coping or miter saw to cut one piece at a 90-degree angle and another at a 45-degree angle with the lower edge longer than the upper. Cutting the upper edge longer... More »

www.reference.com Home & Garden Home Maintenance Carpentry

To cut crown molding corners, first put the molding upside down in a miter box, making sure it is braced on the back and side of the box, and then cut the molding at a 45-degree angle with a hand saw. This method works f... More »

www.reference.com Home & Garden Home Maintenance Carpentry

Install brick molding by cutting it to size, miter cutting the corners and using adhesive and nails to attach it. You need adhesive, caulk, nails, a hammer, paint, a miter saw and brick molding. You can complete the inst... More »

www.reference.com Home & Garden Home Maintenance Carpentry