Disassembling a Maytag dryer involves removing the back, top, front and side panels to gain access to the key components that may need testing, changing or replacing. These steps are simple and can be done quite rapidly. More »

www.reference.com Home & Garden Appliances Washers & Dryers

To disassemble a Maytag dryer, unfasten the screws, disengage the front cover, detach the shroud and remove the blower. Proceed to dismantle the belt from the idler pulley, and separate the drum from the dryer. More »

www.reference.com Home & Garden Appliances Washers & Dryers

Unplug the dryer, check for drum movement, replace the felt seal or sliders if necessary. Check for problems with the drum support rollers, the drum's rear shaft, the mounting bearing and the idler pulley. More »

To disassemble a Maytag dryer, unfasten the screws, disengage the front cover, detach the shroud and remove the blower. Proceed to dismantle the belt from the idler pulley, and separate the drum from the dryer. More »

www.reference.com Home & Garden Appliances Washers & Dryers

A Maytag front load dryer can be purchased on the websites for The Home Depot, Lowe’s and Sears. As of February 2015, all of these websites provide shoppers with lists of the different models of Maytag front load dryers ... More »

www.reference.com Home & Garden Appliances Washers & Dryers

The instructions for installing a Maytag dryer are to screw in the legs on the bottom of the unit, connect the power cord wires appropriately in the terminal block and connect the vent to the exhaust port at the back of ... More »

www.reference.com Home & Garden Appliances Washers & Dryers

According to Maytag.com, the model number of a Maytag dryer is located on the upper left of the cabinet (in the back), inside the door or inside on the back frame (visible with the door open). On a Maytag gas dryer, the ... More »

www.reference.com Home & Garden Appliances Washers & Dryers