Many utility and service companies provide the service of lighting the furnace pilot, or one may do it by locating the pilot and the control knob on the equipment. One should always exert caution and refer to the owner's... More »

Plugging the furnace in and ensuring sufficient well-maintained ductwork is connected are basic steps to installing a Coleman furnace. These units are designed to be installed in an open space or an area with a recess; t... More »

www.reference.com Home & Garden Heating & Cooling

Coleman furnaces are available from local heating and cooling specialists. To search for local dealers by zip code, potential customers can visit the website for Coleman Heating and Air Conditioning. More »

www.reference.com Home & Garden Heating & Cooling

Lighting a gas furnace involves turning off the pilot valve, lighting the pilot with a long fireplace match, then turning the gas knob to the On position. This process takes less than half an hour. More »

Most licensed heating, ventilation, and air conditioning service companies provide installation services for indoor and outdoor furnaces. There are things to consider when selecting a company to work with, such as its cr... More »

www.reference.com Home & Garden Heating & Cooling

To turn a water heater on, turn the gas supply off, and then set the gas knob to the pilot position. Press the reset button, and light the pilot. Turn the gas back on, and set the temperature to your liking. More »

www.reference.com Home & Garden Heating & Cooling

Light the pilot on a gas-log fireplace by turning the gas flow knob to the "pilot" setting, holding the knob in and using a match to ignite the pilot. After lighting the pilot, continue to hold the control knob in for ab... More »