Code alarm remote starters work by switching a car's ignition system on when the device receives a signal from the accompanying remote transmitter, which is usually a key fob. The remote starter connects to the ignition ... More » Vehicles Car Parts & Maintenance

To install a code alarm remote, take all fuses out of the wire harness. Install the wires in the following order: siren, main feed, switched feed, ground and starter interrupt. Next, attach the wires for the door pin swi... More » Vehicles Car Parts & Maintenance

Code Alarm products are produced to be used in car alarms, replacement transmitters and remote start systems. The company offers each of these products separately or they can be bought together in the same device from ma... More » Vehicles Car Parts & Maintenance

A remote car starter is essentially a small radio transmitter, usually attached to a key fob, that connects with a radio receiver attached to the starter mechanism inside the car. When the transmitter is activated, the r... More »

To get a remote start system installed in a car, find a safe place to conduct the installation, and then connect the remote start system to the car's chassis, ignition, starter and accessory. For proper wiring, refer to ... More »

A remote car start system uses a wireless transmitter to activate the starter on a vehicle, eliminating the need for a driver to place a key in the ignition switch and turn it to start the car. The wireless transmitter i... More »

To program your car key fob, switch the ignition on using the key, and quickly press the lock button on the fob. Release the button and switch off the ignition. Perform these steps four times in quick succession to put t... More »