articles

Code alarm remote starters work by switching a car's ignition system on when the device receives a signal from the accompanying remote transmitter, which is usually a key fob. The remote starter connects to the ignition ... More »

www.reference.com Vehicles Car Parts & Maintenance

To install a code alarm remote, take all fuses out of the wire harness. Install the wires in the following order: siren, main feed, switched feed, ground and starter interrupt. Next, attach the wires for the door pin swi... More »

www.reference.com Vehicles Car Parts & Maintenance

Code Alarm products are produced to be used in car alarms, replacement transmitters and remote start systems. The company offers each of these products separately or they can be bought together in the same device from ma... More »

www.reference.com Vehicles Car Parts & Maintenance
similar articles

To program your car key fob, switch the ignition on using the key, and quickly press the lock button on the fob. Release the button and switch off the ignition. Perform these steps four times in quick succession to put t... More »

www.reference.com Vehicles Car Parts & Maintenance

Push-button ignition systems use a radio transmitter in a key fob to send a code to a computer in a vehicle, so the driver leaves the fob in a pocket or purse and pushes a button on the dashboard to engage the starter. I... More »

www.reference.com Vehicles Car Parts & Maintenance

To reset a Viper car alarm, use the key fob by pointing it at the vehicle. Wait for the alarm to sound for six seconds, and then press the lock button on the key. More »

www.reference.com Vehicles Car Parts & Maintenance

A passive alarm system is a system, primarily found in cars, that activates automatically when the key is removed from the ignition. Alarm features may include sounds, flashing lights, ignition cutoff, proximity sensors ... More »

www.reference.com Vehicles Car Parts & Maintenance