Web Results

www.reference.com/article/ways-clean-mold-mildew-333e633b17fe5893

Clean mold and mildew by using a bleach and water solution, a commercial mold and mildew cleaner or dish washing liquid. Rinse the area thoroughly with clean water and allow it to dry. Ventilation is necessary during the cleaning process, and also helps prevent mold and...

www.reference.com/article/remove-mold-mildew-770b99ec9c1b1dcf

To remove mold and mildew for good, remedy the poor conditions, take daily precautions, clean the mold and mildew and re-seal problem areas. Consider investing in mildew-resistant laminate flooring or mildew-resistant paint.

www.reference.com/article/causes-mold-mildew-6a3145e95126f0b

Indoor mold and mildew is typically caused by humidity, condensation and poor ventilation. Mold spreads through tiny spores that float through the air and reproduce when they land on moist surfaces, so any conditions that increase moisture levels can lead to mold growth...

www.reference.com/article/clean-mold-mildew-basement-f12adb977122dbb4

Basement mold and mildew can be cleaned by soaking up excess moisture, thoroughly drying the area and treating the affected areas with antimicrobial spray. If the mold or mildew is widespread, home fogging machines containing antimicrobial solutions allow for efficient ...

www.reference.com/article/difference-between-mold-mildew-d47b439e4e435603

Mold and mildew are both fungi that grow in areas of warmth and moisture; however, they are dissimilar in several ways, including their colors and their growth patterns. Mildew tends to be white or gray and grow in small patches, while mold is black or green and can gro...

www.reference.com/article/clean-mildew-5f1f8507a3fa51e6

Clean mildew by vacuuming the item, cleaning the surface with a rubbing alcohol solution, placing the item in the sun and spraying it with disinfectant. You need a vacuum, baking soda, a cloth, rubbing alcohol, warm water, a sponge, a fan and disinfectant to complete th...

www.reference.com/article/paint-over-mold-mildew-bafcaf39f49ea429

To paint over mold and mildew, prepare the surface with mold or mildew for painting by protecting surrounding areas, scrubbing with a bleach solution, rinsing in tap water and drying. Then, apply a mold inhibiting primer, and cover with a top coat.