Web Results


The design of barbed wire cattle fencing includes posts spaced 12 to 20 feet apart and three to five strands of barbed wire placed evenly up to 51 or 54 inches in height, according to the Virginia Cooperative Extension. Strands of barbed wire are spaced anywhere from 8 to 16 inches apart depending u


Barbed wire was developed by several people, but the first person to patent it was Joseph Glidden. Inspired by a wire fencing prototype displayed at the 1873 DeKalb County Fair in Illinois, Glidden experimented with different wire twist methods and finally filed his patent on November 24, 1874.


To install fencing, measure the size of the fence panels, and set the corner posts at the desired distance. Place posts along the fence line, using the size of the panels as a guide. Attach rails to the top and bottom of the posts, and install the first panel at one corner. Install the remaining fen


Barbed wire established finite boundaries among adjacent farming lands, facilitated the work of some ranchers and farmers and sparked disputes over rights to land and water. Barbed wire first saw use in the American plains during the late 1860s. Farmers and large-scale ranchers turned to barbed wire


Barbed wire tattoos have several meanings including hope, faith and salvation. According to Tattoo Need, the barbed wire was not invented until 1865, so there are no barbed wire tattoos preceding this date.


To install hog wire fence panels, staple the ends of hog wire to wooden posts or sandwich the panels between posts to hide the ends of the wire. Add wooden rails to the top and bottom of the panel, and set them in concrete.


To install an electric fence, determine the spacing and the number of wires required. Measure the appropriate height for the fence. Prepare enough brace corners to enable every corner of the electrical fence to be braced with a corner piece.


To install a wooden fence, dig postholes around the perimeter of the area you intend to fence in, set the posts, and place fence panels between the posts. Complete the project by placing gate posts and installing a gate.


To install a snow fence, gather information about the installation location, gather the necessary material and tools, install the posts and attach the fencing to the posts. The fence can be wooden or plastic, depending on the owner's preference.


To install a vinyl fence, stake out the fence line, and tie a string between the stakes. Center the posts between the stakes, and dig a hole 10 inches in diameter and deep enough to house 1/3 of the post. Secure the posts with gravel and concrete, and install the rail brackets on the fence posts. Se