Web Results


To apply automotive clear coat, apply the coat to the car, and overlap each stroke by 50 percent to prevent tiger striping. Continue until the whole car is covered. Do not rush; adhere to the paint manufacturer's guidelines for time restrictions after application. Ensure that paint application occur


Satin paint has more gloss than flat or eggshell finish paint and less than gloss paint. This gloss causes adhesion failure of some paints. Surface preparation is essential for a good finish.


A satin nickel finish is a nickel plating that covers another metal, such as brass; it has been dulled to remove the shine and lacquered to preserve the finish. Items with a satin nickel finish are typically much less expensive than those with polished nickel finishes, which lack the lacquer and off


Ironing satin is a simple process that can be completed within minutes. The iron must be set to a very low heat so as not to damage the satin and an appropriate smooth and slightly yielding surface should be used under the garment. A light touch is required throughout for this delicate fabric./


With a bit of preparation, satin shoes can be cleaned in cold water using hand soap or cleaners that use sodium percarbonate. Generally, any attempt to clean satin shoes begins with applying cold water.


The best way to wash satin fabric depends on what type of fibers are used, but most satin pieces last longer and look better when washed by hand. Dry-cleaning is necessary, however, for satin made with a silk-and-acetate combination.


To repair a scratch in the clear coat, first clean the car panel with warm soapy water. For scratches that have only penetrated the clear coat, the scratch can be carefully sanded out. After sanding the clear coating, the scratched area needs to be replaced.


The biggest difference between silk and satin is that silk is a specific material that is used to make fabric, and satin is a fabric weave that can be made using a variety of materials, including silk. Silk is a naturally produced fabric material that is made by silk worms.


To iron a satin dress, turn it inside out and place a cloth over the satin fabric. Then press it using a low heat setting; do not use a steam setting.


A satin finish is slightly shinier than an eggshell finish. Eggshell, low-lustre and satin paints are not as shiny as semi-gloss paints and are shinier than flat paints. They have warmer tones and lend an appearance of depth to the painted area.