Web Results


Sodium hydroxide solution 50% in H2O; CAS Number: 1310-73-2; Linear Formula: HNaO; find Sigma-Aldrich-415413 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.


Caustic Soda Solution (NaOH 50%) Sodium Hydroxide Solution Brief Description Caustic Soda Solution is a clear, colorless, odorless and slightly viscous liquid. It is misci-ble with water at any ratio. Caustic Soda Solu-tion reacts strongly alkaline and is highly corro-sive to various materials.


Liquid Caustic Soda, (Sodium Hydroxide), 50% – HAWKINS is a key CAUSTIC SODA distributor and operates liquid CAUSTIC SODA barge terminals in Memphis, TN, Dupo, IL, Camanche, IA, and St. Paul, MN. The product can be supplied as is, diluted with water to a specified concentration, or buffered to significantly reduce the freezing point.


CAUSTIC SODA SOLUTION (50%) Revision 3.0 Revision Date 02.01.2018 Print Date 02.01.2018 Page 1 of 22 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier CAUSTIC SODA SOLUTION (50%) CAS-No.: 1310-73-2 1.2 Relevant identified uses of the substance or mixture and uses advised against Use:


CAS: 1310-73-2 MDL: MFCD00003548 EINECS: 215-185-5 Synonyms: Caustic soda, Lye, Sodium hydrate, Soda lye Clear liquid. Corrosive and toxic.

causticprills.com/MSDS/SODA/Sodium Hydroxide Solution 50_Percent_(EN).pdf

Sodium Hydroxide Solution 50% SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Sodium Hydroxide Solution 50% Chemical name (NaOH) Sodium Hydroxide Solution (10 – 60%) CAS number 1310-73-2 EU index number 011-002-00-6 EC number 215-185-5 1.2.


Take 1000 ml water in a conical flask. As the molecular weight of NaOH is 40 so to make 50% solution take 20 gm of that NaOH into the water. agitate that solution and then you will get 50% NaOH solution .


50% NaOH contains 50%w/w sodium hydroxide and for 50g of the compound is containd in every 100ml of its solution. Sodium hydroxide are made as solid deliquescence pellets. Deliquescence substances are chemical compound that tend to absorb so much water from the atmosphere that they dissolve in it to form an aqueous solution of the compound.


Sodium hydroxide is industrially produced as a 50% solution by variations of the electrolytic chloralkali process. Chlorine gas is also produced in this process. Solid sodium hydroxide is obtained from this solution by the evaporation of water. Solid sodium hydroxide is most commonly sold as flakes, prills, and cast blocks.


Safety Data Sheet (CAUSTIC SODA 50% SOLUTION) PAGE 2 of 10 P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing.