Web Results

www.answers.com/Q/What_is_11_gauge_steel_thickness_in_inches

A second means of determining thin plastic film thicknesses is that 1 gauge is equal to 1/100 mil or 0.00001 … inches. or 0.254 microns. thus 22 gauge would be 0.22 mils or 5.6 microns (very ...

www.slotcar.com/drs/gachart.htm

| Drag Racing Specialties Home Page | Racer's Conversion Chart Gauge to Inches to Millimeters: B & S Gauge : Inch (Decimal) Millimeter (mm) Inch (Fraction)

www.firemountaingems.com/resources/encyclobeadia/charts/6404

Conveniently determine the diameter, in inches or millimeters, of wire gauges from 10 to 38 gauge.

www.tedpella.com/company_html/gauge.htm

Standard Gauge for Sheet and Plate Iron and Steel Gauge represents the standard gauge for sheet and plate iron and steel in the U.S.A.:

www.reference.com/home-garden/thick-14-gauge-steel-inches...

How Thick Is 14-Gauge Steel in Inches? How Thick Is 14-Gauge Steel in Inches? Fourteen gauge standard steel is 0.0747 inches thick, while galvanized steel measures 0.0785 inches across. Galvanized steel has a zinc coating that guards against corrosion. In either case, the smaller the gauge, the thicker the steel.

www.metaltrone.com/metalgauge-chart.pdf

GAUGE TO THICKNESS CHART Gauge Stainless Galvanized Sheet Steel Aluminum Fraction inches (mm) inches (mm) inches (mm) inches (mm) 30 0.0125 (0.33) 0.0157 (0.40) 0.0120 (0.30) 0.0100 (0.25) ... 11 1/8 0.1250 (3.18) 0.1233 (3.13) 0.1196 (3.04) 0.0907 (2.30) ...

stainlesssteelmarket.com/stainless-steel/2800.html

Sheet Metal Wire Gauge Sizes Data Chart | Gage Sizes Table Chart . Reference Sheet Metal and Wire Gauge Size Data and Table for various in decimal fractions of an inch while referencing the gauge size and material.

www.onlineconversion.com/forum/forum_1021325560.htm

convert gauge of metal to inches and mm. by Jeff Gazen on 05/13/02 at 14:32:30 how to convert steel thickness gauges to inches and to millimeters i.e. 26 ga = ? inches 26 ga = ? mm

www.renovation-headquarters.com/metal-gauge-converter.htm

Converting Sheet Metal Gauge To Thickness In Inches. Working with sheet metal, as shown in Figure 1, gauge sizes can be confusing at the best of times. Sheet metal gauges work opposite to what one might consider the norm. The smaller the number, the thicker the material. Hence, 4 gauge material is thicker than 6 gauge material.

www.mesteel.com/cgi-bin/w3-msql/goto.htm?url=/info/carbon/...

Mesteel - Steel Thickness Conversion Tables tables. Convert Gauges, BWG, USG to inches and millimeters