Web Results

www.reference.com/article/use-miter-saw-1185d4379b5c24e6

Use a power miter saw by keeping it steady and holding it firm. Make sure you adjust the angle for cleaner cuts as well as practice safety techniques. Manual miter saws may require a different set of techniques.

www.reference.com/article/miter-cut-f34c59c6e67f48f9

A miter cut is an angled cut made on a piece of wood. Special saws are used to make these angled cuts.

www.reference.com/article/can-chart-compound-miter-saw-cuts-2d4c3f67a9bde6e0

Compound-Miter.com and EliteTrimWorks.com provide charts for compound miter saw cuts. To find the correct chart, review the ones on each website for the corner angle that matches your project.

www.reference.com/article/replace-blade-delta-miter-saw-87ff99c60c9c936e

To replace a blade on a Delta miter saw, unscrew the guards from the saw and then use a wrench to unscrew the bolt holding the blade while holding the bolt in place on the other side with an Allen wrench. Remove the old blade and screw in the bolt around the new blade.

www.reference.com/article/can-instructions-cutting-molding-miter-saw-2f75d734042c910a

ThisOldHouse.com, RonHazelton.com and DoItYourself.com each have project instructions for cutting molding with a miter saw. These sites walk users through the steps of measuring and cutting different types of molding.

www.reference.com/article/double-bevel-miter-saw-239137dcc7e9096e

A double-bevel miter saw creates angled cuts on either the left or the right side of a material, allowing for cuts in both directions without the need to rearrange the material. For comparison, a single-bevel saw cuts in only one direction, which requires you to flip th...

www.reference.com/article/miter-corners-635a6147d7a9ae1c

To miter corners, choose a saw, mark a 45-degree angle, and cut the ends of two pieces of wood on the line you marked. A miter joint does not require special tools, but a miter box is inexpensive and helpful if you need to cut numerous mitered corners.