Web Results


| Drag Racing Specialties Home Page | Racer's Conversion Chart Gauge to Inches to Millimeters: B & S Gauge : Inch (Decimal) Millimeter (mm) Inch (Fraction)


GAUGE TO THICKNESS CHART Gauge Stainless Galvanized Sheet Steel Aluminum Fraction inches (mm) inches (mm) inches (mm) inches (mm) 30 0.0125 (0.33) 0.0157 (0.40) 0.0120 (0.30) 0.0100 (0.25) ... 10 9/64 0.1406 (3.57) 0.1382 (3.51) 0.1345 (3.42) 0.1019 (2.59) ...


Conveniently determine the diameter, in inches or millimeters, of wire gauges from 10 to 38 gauge.


Converting Sheet Metal Gauge To Thickness In Inches. Working with sheet metal, as shown in Figure 1, gauge sizes can be confusing at the best of times. Sheet metal gauges work opposite to what one might consider the norm. The smaller the number, the thicker the material. Hence, 4 gauge material is thicker than 6 gauge material.


For example, 18 gauge steel, according to a gauge conversion chart, is 0.0478 inch or 1.214 millimeter. The gauge number “18” holds no relevance to the actual measurements. There are several different gauge systems used today, with specific gauge designations used for specific metal types. For example, in one gauge system, 18 gauge steel ...


Gauge represents the standard gauge for sheet and plate iron and steel in the U.S.A.: Number of gauge: Approximate thickness in fractions of an Inch: Approximate thickness in decimal parts of an inch: Approximate thickness in millimeters: Weight per square foot in ounces avoirdupois: Weight per square foot in pounds ...


Millimeters to inches (mm to in) conversion calculator and how to convert. Millimeters to Inches conversion. Enter the length in millimeters (mm) and press the Convert button:


Mesteel - Steel Thickness Conversion Tables tables. Convert Gauges, BWG, USG to inches and millimeters


For the purpose of securing uniformity the following is established as the only standard gauge for sheet and plate iron and steel in the United States of America, namely: Number of gauge. Approximate thickness in fractions of an inch. Approximate thickness in decimal parts of an inch.


Gauge (or gage) sizes are numbers that indicate the thickness of a piece of The chart below can be used to determine the equivalent sheet thickness, in inches or millimeters, for a gauge number from the 10, 0.1345, 3.416, 5.487, 26.790.