Web Results

journeymansjournel.wordpress.com/2017/03/24/heat-treating-o1

Mar 24, 2017 ... O1 is a high carbon medium alloyed cold work tool steel with 1.1% ... hardness and the hardness scale we are working to is the Rockwell C ...

www.metals4uonline.com/tool-steel-o1-drill-rod

Tool Steel O1 Drill Rod, Oil Hardening ... O-1 drill rod round is a non-deforming tool steel ground to a tight tolerance diameter, usually ±0.0005 in (±0.013 mm) ...

www.carpentertechnology.com/blog/alloy-selection-heat-treating-and-maintaining-cold-work-tooling

A new premium P/M high speed steel known as Carpenter Technology Micro-Melt Maxamet® ... Micro-Melt PD#1 alloy with that of the five grades just mentioned.

agrussell.com/steel-articles/rockwell

The Rockwell rating is a scale that is used to measure the hardness of a material. An example is stainless steel AUS-8, which usually 57-59 Rc. The Rockwell ...

www.tidewaterblacksmiths.com/heat.html

Hence, we think of them as water hardening steels. In general, the medium alloy steels such as 4140, 4340, 5160, O1 require a medium speed quench and we can use ...

www.steelstore.com/app/uploads/sites/60/2018/06/AISI-01-Datasheet.pdf

AISI 01 general purpose oil-hardening tool steel is a versatile manganese-chromium-tungsten steel suitable for a wide variety of cold-work applications.

www.sword-buyers-guide.com/sword-steels.html

Stainless steel swords (or any blade over 12" long) is considered to be TOO ... 1060 Carbon Steel is a great compromise between hardness (edge holding ...

medievalswordsworld.com/sword-steels-complete-guide

Jul 20, 2019 ... Mono hardening is when the entire blade is heated to the same temperature and ... L6 BAINITE, Tool Steel, C 0.7%, Mn 0.6%, Cr 1%, Mo < 0.5%, ...

www.productionmachining.com/blog/post/important-machining-factors-of-carbon-steels

Mar 22, 2006 ... If the grade designation of a steel begins with a “1,” chances are that ... Both the hardness and machinability of plain carbon steel grades ...

www.matweb.com/search/datasheet.aspx?matguid=42da7db7f74041a98f3ee0239b4c6ac6

Mechanical Properties, Metric, English, Comments. Hardness, Knoop, 537, 537, Converted from Rockwell C hardness. Hardness, Rockwell C, 50, 50.

iopscience.iop.org/article/10.1088/1757-899X/343/1/012005/pdf

size, the greater the hardness. 1. Introduction. The standard tool steel ... Table 1. Chemical composition of AISI 01. NO. Composisi. Persentase (%).